Page 480 - Workshop Manual - Aumark (BJ1051)

04-336
Diagnosis- combination meter

(b) Check if fuse F15 (10 A) and F17 (7.5
A) in body fuse block have been blown.

04

Is check result normal?
Yes > Go to step 2.
No > Go to step 4.
2. Checking power circuit of combination meter

(a) Disconnect connector of combination
meter B033.

(b) Use a multimeter to measure voltages to
ground of connector pins 2 and 10 of
combination meter B033 respectively.
Voltage: battery voltage

Are check results normal?
Yes > Go to step 3.
No > If battery voltage is not available on connector pin 2 of combination meter B033, repair line
open from fuse F15 (10A) to connector pin 2 of the meter.
If battery voltage is not available on connector pin 10 of combination meter B033, repair
line open from fuse F17 (7.5A) to connector pin 10 of the meter.

Page 480