Page 141 - Foton Workshop Manual - Sauvana

VEHICLE CARE - VEHICLE CARE 04-1
VEHICLE CARE

NOTICES

1. Preparation before performing maintenance item
(a). If necessary, the operating personnel shall wear safety shoes, work gloves and
safety goggles, etc..".
(b). Make sure the ventilation and cleanness of work site; the arrangement of tools and
instruments shall be tidy; fire extinguisher shall be equipped when necessary. 04
(c). Check safe condition of instrument and equipment use, such as check lift and jack,
etc.."
(d). Check vehicle safety driving and operation condition, make sure the maintenance
can be performed successfully."
2. Precautions in maintenance process
(a). Before the vehicle drives into lifting frame, make sure that there is enough distance
between lifting frame and vehicle bottom & two sides to avoid scratches."
(b). Before lifting vehicle, make sure that vehicle weight does not exceed rated loading
capacity of lift."
(c). When lifting vehicle, must select the right lifting point."
(d). In the process of lifting vehicle, starting engine or putting into gear is not allowed
when the driving wheel is landing, otherwise the operating personnel and vehicle
may be in danger."
(e). In the maintenance process, the operating personnel shall strictly obey each safety
regulation and service regulation, otherwise, major accident and personal injury may
occur."
(f). When replacing parts and consumables, please use the products recognized by
Futian Automobile Co., Ltd. to guarantee vehicle's safety and performance."
3. Precautions after maintenance
(a). After maintenance, you must perform test drive and pay special attention to the
checkup for braking system and supplementary restraint system (SRS)."
(b). Before delivering the vehicle to customer, the fault messages in memory must be
eliminated."

Page 141