Page 339 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL - ENGINE ASSEMBLY 12B-49

(b). Evenly apply a suitable amount of Loctite
263 locking sealant to the flywheel
fastening bolt as required.
NOTICE:
Before applying sealant, it shall be ensured that
the surface of bolt is dry, clean without oil stain.
(c). Align the pin hole on flywheel to dowel pin
on crankshaft, tighten the bolt with hand.
(d). Install the flywheel stop dog, tighten the
flywheel fixed bolts for three times in a
diagonal cross order.
Torque : 100 ± 5 N•m 12B
(e). Remove the flywheel stop dog.

7. Install oil pump and oil strainer
(a). Drip a small amount of engine oil to the
transmission shaft cavity of oil pump.
The oil pump shall rotate flexibly without
clamping stagnation when the pump shaft
is rotated by tools.

(b). Gently insert the oil pump into mounting
hole, install the fixed bolt of oil pump.
Torque : 22N•m

Page 339