Page 139 - Jaymac Trade Product Catalogue
P. 139
Air Dryer Machines
Air Filter
Air Filter Air Dryer
Hypertherm Eliminizer Refrigerated
• Ready to install kit • The most effective method of ensuring dry compressed
• 0.85 micron filter to protect air supply
against contaminated air • Low pressure drop even with load variances ensures
• Auto-drain moisture reliable air supply
separator • High Efficiency Aluminium Cooling
• Ideal for Plasma Cutting Technology ensures low energy
consumption
machines
• Flow rate capacity 849L/
Part No. Description Unit Qty Net Price min / 30CFM
EACH
10-AFH128647 Complete filter unit EACH (Ex GST) (Inc GST) • Operating Pressure 102PSI
10-AFH011092 Replacement filter element 1 $343.00 $377.30 • 240V power supply
1 $89.60 $98.56
Application Info
Tech Tip • Ideal for use with Plasma
Air Filtration for Plasma Cutting Cutting systems and other
Clean and dry compressed air sensitive processes requiring
supply makes a huge difference to moisture-free compressed air
consumable life on Plasma systems. • Essential for coastal and humid
Dirty or wet air is hard on the tips and environment workshops
electrodes and will cause them to wear
much faster. Part No. Description Unit Qty
In addition to this, clean and dry air will
significantly improve cut quality. 5-ADRA17 30CFM Air Dryer EACH 1
As a bare minimum every plasma
system should have a good quality Pre Filter
filter (e.g. Hypertherm Eliminizer) For Compressed Air
attached to the plasma cutter. For
users doing a large volume of cutting • 3micron filtration ensure clean
or critical work a refrigerated air dryer air supply
is highly recommended. This is even
more important in coastal and humid • Flow rate capacity 1,270L/min
environments. Any refrigerated dryer / 45CFM
should have a good quality pre-filter to
clean the air before it enters the dryer. • Made in EU – quality you can
trust
Application Info
• Ideal for use with Plasma Cutting
systems and other sensitive
processes requiring clean
compressed air
• Use in-line before PneuTech Air
Dryer for optimum air quality
Part No. Description Unit Qty
5-AFP42 3 Micron 1-1/2FBSP Ports EACH 1
1800 809 362 | www.jaymac.net.au 139
Air Filter
Air Filter Air Dryer
Hypertherm Eliminizer Refrigerated
• Ready to install kit • The most effective method of ensuring dry compressed
• 0.85 micron filter to protect air supply
against contaminated air • Low pressure drop even with load variances ensures
• Auto-drain moisture reliable air supply
separator • High Efficiency Aluminium Cooling
• Ideal for Plasma Cutting Technology ensures low energy
consumption
machines
• Flow rate capacity 849L/
Part No. Description Unit Qty Net Price min / 30CFM
EACH
10-AFH128647 Complete filter unit EACH (Ex GST) (Inc GST) • Operating Pressure 102PSI
10-AFH011092 Replacement filter element 1 $343.00 $377.30 • 240V power supply
1 $89.60 $98.56
Application Info
Tech Tip • Ideal for use with Plasma
Air Filtration for Plasma Cutting Cutting systems and other
Clean and dry compressed air sensitive processes requiring
supply makes a huge difference to moisture-free compressed air
consumable life on Plasma systems. • Essential for coastal and humid
Dirty or wet air is hard on the tips and environment workshops
electrodes and will cause them to wear
much faster. Part No. Description Unit Qty
In addition to this, clean and dry air will
significantly improve cut quality. 5-ADRA17 30CFM Air Dryer EACH 1
As a bare minimum every plasma
system should have a good quality Pre Filter
filter (e.g. Hypertherm Eliminizer) For Compressed Air
attached to the plasma cutter. For
users doing a large volume of cutting • 3micron filtration ensure clean
or critical work a refrigerated air dryer air supply
is highly recommended. This is even
more important in coastal and humid • Flow rate capacity 1,270L/min
environments. Any refrigerated dryer / 45CFM
should have a good quality pre-filter to
clean the air before it enters the dryer. • Made in EU – quality you can
trust
Application Info
• Ideal for use with Plasma Cutting
systems and other sensitive
processes requiring clean
compressed air
• Use in-line before PneuTech Air
Dryer for optimum air quality
Part No. Description Unit Qty
5-AFP42 3 Micron 1-1/2FBSP Ports EACH 1
1800 809 362 | www.jaymac.net.au 139
