Page 12 - Reseller_Catalogue

CIRCUIT BREAKER LOCKOUT

CIRCUIT BREAKER LOCKOUTS CB05
A range of four padlockable circuit breaker lockouts designed to fit Push button operated and locates into
most modern single and multiple pole miniature circuit breakers. the 2 holes either side of the breaker
Manufactured from strong nylon, this range of miniature circuit switch (see illustration). Fits most
breaker lockouts allows breakers to be locked off individually. popular breakers up to 60 Amp.
Will also fit breakers connected with a
CB01 cross bar. Locates prongs inside.
A single pole lockout, model CB01 CB06
requires a switch breaker with a
recessed hole in it. Accommodate Push button operated and locates into
9
breakers up to / 16” (14mm) in width. the 2 holes either side of the breaker
switch (see illustration). Fits most
popular breakers up to 60 Amp. Will
CB02 also fit breakers connected with a cross
bar. Locates prongs outside.
A double pole lockout, model CB02
requires the breakers to be connected CB07
with a cross bar. Accommodate
breakers up to / 8” (45mm) in width. Push button operated and locates into
5
the 2 holes either side of the breaker
CB03 switch (see illustration). Extra wide for
larger breakers over 60 Amp. Will also
A single pole lockout, model CB03 fit breakers connected with a cross bar.
does not require a switch breaker with Locates prongs inside.
a recessed hole in it. Accommodate
breakers up to / 16” (14mm) in width. CB08
9
Adjustable thumb wheel operation and
CB04 fits larger or multi-pole circuit breakers
connected with a cross bar. No holes in
A double pole lockout, similar to CB02 the breakers are required.
but slightly larger to fit larger breakers.
Accommodate double and triple
breakers.

Code Description Code Description
CB01 Single pole breaker lockout CB05 MCB lockout inside prongs
CB02 Double pole breaker lockout CB06 MCB lockout outside prongs
CB03 Single pole breaker lockout CB07 MCB lockout wide inside prongs
CB04 Double pole breaker lockout CB08 MCB lockout thumb wheel

‘NO HOLE’ CIRCUIT BREAKER LOCKOUTS CB09
CIRCUIT BREAKER LOCKOUT
This range of ‘No Hole’ circuit breaker lockouts are ideal for breakers that Fits switches
do not have any built in locking facility. The unique design, with thumb 5 /8”(16.5mm) wide x
wheel operation clasps onto the switch providing secure locking protection. 1 /2”(11.6mm) thick
Available in 3 sizes. Can be used with lockout cleats for hard to lock longer (up to 277 Volt).
sliding switches and switches with large angular rotation.

Code Description
CB10
CB09 277 volt lockout Fits switches
CB10 480/600 volt lockout 1 /2”(41.2mm) wide
1
CB11 480/600 volt oversize lockout x /16” (13.9mm) thick
9
CLT1 Cleat for use with CB09 (480/600 Volt).
CLT2 Cleat for use with CB10

LOCKOUT CLEATS CB11
Fits oversized switches
Compatible with models CB09 and CB10, 2 /2”(63.5mm) wide x
1
ensures positive lockout for hard to lock long 3 /4”(22.2mm) thick
sliding switch throws and switches with a (usually 480/600 Volt).
large angular rotation. Snap-on and off design
allows for use only when needed.

12