Page 131 - StorageConceptsCatalogue
P. 131
BEFORE ORDERING A N Y PUMP, ESTABLISHING COMPATIBILITY W I T H THE MSDS O F DRUM PUMPS
THE FLUID USED I NAPPLICATION IS A MUST! BONDIGROUND CABLES O N PAGE B l 2 8
ARE REQUIRED WHEN PUMPING FLAMMABLE O R COMBUSTIBLE LIQUIDS.
STAINLESS STEEL STEEL PULLTYPE PUMPS c=
PULLTYPE PUMPS
Model No. DA527
.Model No. DA530 For most non-corrosiveand
Use with certain acidsand alkalis non-flammableliquids
Fits5 to SS-gallondrums Fits 5 to 55-gallon drums
with a 2" bungadaptor
. with a 2" bungadaptor
Transfer rate: 8 02. per stroke .Transferrate: 8 oz. perstroke
Wettedcomponents 304 stainless Wetted components: Brass,
steel, brass, polyethyleneand steel steel and polyethylene
Model No. DA531 -Model No. DC113
For most acids and corrosives For most water-solubleinorganicacids,
Fits5 to 55-gallon drums
waxes, detergents
.. with a 2"bung adaptor Fits5-gallon pails w ~ t ha 2" bungadaptor
Transferrate: 8 oz. per stroke Transfer rate: 8 oz. per stroke
Wetted componentr: 304 stainlesssteel. Wetted components: Buna-N,
316 stainlesssteel, brass and PTFE polyethylene, leatherand steel
Model No. DA529 .Model No. DC114
Usewith most non-corrosive,
. Forfast transfero f most acidsand corrosives light to medium viscosityliquids
. Fits 55-gallon drums with a 2" bungadaptor
. Transfer rate: 22 oz. per stroke . Fits55-gallon drums with a 2" bungadaptor
314" diameter spout can be rotated to 180'
. Wetted components: 304 stainlesssteel.
polyethyleneand PTFE and removedto expose garden hose thread
Transfer rate: 22 o z per stroke
Model No. DB845
For fast transfer of most Wetted componentr:
acidsand corrosives Polyethylene, steel andzinc
Fits 55-gallon drum
WC PULLTYPE PUMPS I
.. with a2" bungadaptor
Transfer rate: 22 oz. per stroke Model No. DC116
Wetted componentr: 304 stainlesssteel, For usewith most mild acids,
316 stainlesssteel and PTFE detergents, water and solvents
Good insulation from spark and fire
Adapts to 314' or 2" for 5 to 55-gallon drums
Transfer rate: 8 or. per stroke
Wetted components: Polypropylene,
polyethylene, PVCand silicone
POLYPROPYLENE NYLON PULLTYPE PUMPS
PULLTYPE PUMPS
Model No. DC128 'i
For usewith most lacauerthinners.
Model No. DC127 49-4
For usewith mostantifreeze, detergents, mild acids, detergents, water and
windshieldfluids, glycerin, and mild acids . light viscositypetroleum liquids
Fits I S to 55-gallon drums Fits 15 to 55-gallon drums
with 2' bungadaptor
with 2" bungadaptor
.Transfer rate: 14oz. per stroke Transfer rate 14oz. per stroke
Wetted components:
Polypropylene,steeland Viton' Wened components:
Polypropylene, nylon,
304 stainlesssteel and PTFE
Model No. DC117 ENVIRO-WEDGETM *
For usewith most corrosive chemicals,
The Enviro-WedgeTMincreasesthe amount of product
water, and non-flammablesolvents pumpedout of 25-45 gallon drums. When the drum is
nearlyempty tilt it on an angle and position the wedge
. Good insulation from spark and fire under the drum. Continue pumpinguntil flow stops.
. Fits55-gallon drums 100%recycled, ruggedpolyethyleneconstruction.
Wt. 1.5 Ibs.
. with a2" bungadaptor
Transfer rate 22 o z per stroke Model No. DA660
Wetted components:
Polyethylene, polypropylene,
siliconeand steel
