Page 161 - Arch binder

Operable Partitions 3000 SERIES PART 2 - GENERAL SPECIFICATIONS
10 22 26 (10650)

2.06 PERIMETER TRIM AND SEALS 2. Single Door w/ Bulb Seal: consisting of a single panel hinged
to an adjustable jamb. The lead edge of the panel shall contain
A. Vertical Trim and Seals: Panels shall have vertical astragals
containing fl exible vinyl seals and incorporate reversible fl exible vinyl bulb seals installed along the vertical edge
tongue-and-groove-type confi gurations for positive interlocking creating a positive compression against a rigid wall surface.
with adjacent panels. Vertical astragal type shall be (select): Note: This type of pocket door is normally used with a Model 3020
or 3020WT operable wall system utilizing a parallel or remote
1. Standard Trimless Astragal: consisting of an aluminum stack unit.
extrusion with tongue-and-groove-type vertical astragals.
Vertical trim shall not be permitted on the panel faces, 3. Single Door w/ Expander: consisting of a single panel hinged
resulting in a minimal groove appearance between adjacent to an adjustable jamb. The lead edge of the panel shall contain
panels. an expander mechanism with a nominal 5" [127] of travel,
activated from the face of the panel using a removable wrench
2. Optional Cap-type Astragal: consisting of an aluminum as supplied by manufacturer.
extrusion with tongue-and groove-type vertical astragals for Note: This type of pocket door is normally used with a Model 3020
encapsulating and protecting the fi nish material and substrate or 3020WT operable wall system utilizing a parallel or remote
along the vertical edge of the panel. stack unit.
Note: Optional Cap-type Astragal is not available for Model 3050 4. Double Doors w/ Lap Trim: consisting of two (2) individual
Electrically Operated Walls. panels with each panel being hinged to an adjustable jamb.
B. Horizontal Top Trim and Seals: Top seals shall consist of fl exible The lead edge of each panel shall contain a lap type extrusion
vinyl sweep seals installed on both sides of the panel. The seals that overlaps with the other one, creating a shiplap joint.
shall consist of a compressed bulb between two (2) fi ngers of Note: This type of pocket door in normally used with a Model
vinyl. Top seal type shall be Fixed consisting of continuous- 3030 operable wall system utilizing a center type stack arrange-
contact fl exible vinyl, sealing against the pocket door header ment or Model 3020 or 3020WT remote stack unit.
trim. 5. Double Doors w/ Expander: consisting of two (2)
C. Horizontal Bottom Trim and Seals: Bottom seals shall consist individual panels with each panel being hinged to an
of a fl exible vinyl sweep seal installed on both sides of the panel adjustable jamb. The lead edge of one (1) panel shall
Seal shall consist of a single fi nger of vinyl. Bottom seal type shall contain an expander mechanism with a nominal 127] of
be Fixed consisting of continuous-contact fl exible vinyl, sealing travel, activated from the face of the panel using a removable
against various fl oor surfaces. wrench as supplied by manufacturer. The lead edge of the
D. Pocket Door Header Trim: Header trim shall be extruded from adjacent panel shall contain fl exible vinyl bulb seals installed
aluminum alloy, which prohibits deterioration caused by rust or along the vertical edge for positive compression against the
corrosion. The header trim shall have a durable E.S.P. Bronze face of the operable wall panel.
fi nish. Header Trim shall be attached to the fi nished ceiling Note: This type of pocket door in normally used with a Model
directly above the pocket door(s), providing a fl ush surface for 3030 or 3040 operable wall system utilizing a center type stack
the Fixed top seals to contact. arrangement.
E. Horizontal and Vertical Panel Trim: All exposed panel trim and 6. Double Doors w/Expander and Interlock Switches: consisting
hinges shall be of one (1) similar color (select): of two (2) individual panels with each panel being hinged to an
adjustable jamb. The lead edge of one (1) panel shall contain
1. Dark Bronze. an expander mechanism with a nominal 5" [127] of travel,
2. Grey. activated from the face of the panel using a removable wrench
as supplied by manufacturer. The lead edge of the adjacent
2.07 POCKET DOOR CLOSURES panel shall contain fl exible vinyl bulb seals installed along
the vertical edge for positive compression against the face of
A. Pocket Door Types: Each pocket door confi guration shall be the operable wall panel. Each pocket door shall contain an
hinged to an adjustable jamb consisting of an aluminum electric Interlock Switch to prevent the operator from running
extrusion which is permanently mounted to a structural wall until the pocket doors have been opened up 180o.
surface and is fi eld-adjustable to compensate for out-of-plumb Note: This type of pocket door is used with Model 3050 electrically
conditions of the fi xed wall. The adjustable jamb shall operated wall system utilizing a center type stack arrangement.
incorporate a tongue-and-groove-type vertical astragal for
positive interlocking with a pocket door panel. To stabilize the Note: Pocket doors require additional depth and width
pocket door(s) a surface mounted foot bolt shall be furnished by to the stack area.
the operable wall manufacturer and installed by others in the
fi eld. The pocket door confi guration shall be (select): 2.08 ACOUSTICAL PERFORMANCE
1. Bi-Fold Doors w/ Bulb Seal: consisting of a pair of panels A. Certifi cation: The pocket door(s) shall be of the same panel
hinged together and hinged to an adjustable jamb. The lead construction as the operable wall panels.
panel shall contain fl exible vinyl bulb seals installed along the
vertical edge of the lead panel for positive compression against 2.09 POCKET DOOR ACCESSORY

a rigid wall surface. A roller support caster located at the A. Accessory includes Keyed Cylinder Lock with adjustable
bottom of one (1) panel shall be included to provide additional concealed vertical rod interfacing with strike plate attached to
support for the pocket doors. fi nished fl oor. Lock unit shall be capable of receiving a master
Note: This type of pocket door is normally used with a Model 3020 cylinder, furnished by others and installed by KWIK-WALL as
or 3020WT operable wall system utilizing a perpendicular stack noted on submitted shop drawings.
unit. 4

04-18
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com