Page 173 - Arch binder

Operable Partitions KWV-Tec - TRIMMED PART 2
10 22 26 (10650)
GENERAL SPECIFICATION
be extruded from structural aluminum alloy, which prohibits
deterioration caused by rust or corrosion. The aluminum track
2.07 CLOSURE SYSTEMS shall have a durable anodized clear satin fi nish, which resists
color fading and fl aking. The track shall utilize grooves and
A. Initial Closure System: The lead panel (the fi rst panel exiting interlocking steel pins for positive alignment of adjacent track
the stack) shall form a seal against an Adjustable Starter Jamb sections. The track joints shall be reinforced overhead by a
shall consist of an aluminum extrusion that is permanently heavy-duty steel bracket made of hot-rolled, / 8” [10] thick
3
mounted to a structural wall surface and is fi eld-adjustable to plate steel. Aluminum track shall include an integral nut slot to
compensate for out-of-plumb conditions of the fi xed wall.
accept a hardened steel square nut to facilitate attachment of
B. Final Closure System: The fi nal closure panel (the last panel at each threaded steel all-rod and splice brackets to the overhead
the stack end) shall provide a method for affecting fi nal closure structural support.
of the moveable glass wall system. The type of fi nal closure B. Track Size: The track size shall be Type 425 Multi-Directional
panel shall be (select):
Aluminum Track: certifi ed to be capable of supporting up to
1. Standard Fixed Pivot Panel Closure: consisting of a panel 425 lbs. ( 193 kg ) of total live load weight per panel.
utilizing top and bottom pivots that allows the panel to pivot
90 in one (1) direction and be used to affect fi nal closure, 2.10 CARRIER SYSTEMS
0
and provides access thru the moveable glass wall system A. Carrier Type: Each individual panel shall be top supported by
when it is setup in the extended position. The trail edge of two (2) carriers utilizing a / 8” [16] diameter pendant bolt. Each
5
the Fixed Pivot Panel shall contain a continuous contact, carrier shall consist of dual horizontal, permanently-lubricated,
fl exible rubber seal that interfaces with aluminum precision ground steel bearings with high strength polymer tires
Adjustable Wall Jamb. The wall jamb shall be permanently as required for smooth and quiet operation. Multi-Directional
mounted to a structural wall surface and is fi eld-adjustable carriers shall be capable of negotiating 90 , “X”, “L”, and “T”
o
to compensate for out-of-plumb conditions of the fi xed wall. intersections. As required for moving panels from storage
One (1) side of the fi nal closure location(s) to various installed positions.
panel shall contain a pull handle. (Refer to Part 2.05 "B.
Pull Handle Finish".) B. Carrier Size: The carrier size shall be:
Note: Pivot Panel may not be required. Consult your KWIK- 1. Type 425 Multi-Directional Carrier: certifi ed to be capable of
WALL representative for proper confi guration. See page 7 for supporting up to 425 lbs. ( 193 kg ) of total live load weight
details. per panel
2. Optional Fixed Swing Panel Closure: consisting of a panel 2.11 SUSPENSION SYSTEMS
utilizing top pivot and bottom pivot that engages with a A. Mounting Systems: The KWV-Tec TRIMMED track system
self-closing unit containing a hold-open feature that is shall be supported by (select):
recessed fl ush into the fl oor allowing the panel to pivot 90 0
in one (1) direction and be used to affect the fi nal closure, 1. Standard Drop Rod Mount: consisting of steel drop
and provides access thru the moveable glass wall system rod brackets with drop rods, consisting of adjustable rods of
3
when it is setup in the extended position. The trail edge of grade 2, / 8" [10] diameter threaded steel all-rod provided
3
the Fixed Swing Panelshall contain a continuous-contact, with / 8" [10] serrated steel nuts.
fl exible rubber seal that interfaces with aluminum 2. Optional Direct Mount: consists of / 8” [10] x 3” [76]
3
Adjustable Wall Jamb. The wall jamb shall be permanently lag screws for attachment to a level overhead structural
mounted to a structural wall surface and is fi eld adjustable (wood or steel) support.
to compensate for out-of-plumb conditions of the fi xed wall. 3
One (1) side of the fi nal closure panel shall contain a pull 3. Optional Drop Rod Bracket Mount: consisting of / 8” [10]
thick steel brackets mounted to top fl ange of track and
handle. (Refer to Part 2.05 "B. Pull Handle Finish".)
3
supported with adjustable rods of grade 2, / 8” [10]
3. Optional Pocket Door(s): (see "Glass Wall Pocket Door" diameter threaded steel all-rod provided with / 8” [10]
3
brochure for complete details and specifi cations). serrated steel nuts.
2.08 PANEL ACCESSORIES
A. Accessories including a Floor Guide Channel shall be
compatible
with other accessories and options, furnished by KWIK-WALL 3.01 INSPECTION
as A. Proper and complete preparation of the moveable glass wall
noted on submitted shop drawings. system opening shall be by others in accordance with the
1. Floor Guide Channel: consisting of a clear anodized extruded architectural drawings, KWIK-WALL’s shop drawings and
aluminum channel that is recessed into the fl oor (fl ush with ASTM E 557. Any deviation of the actual opening from these
fi nished fl oor) to provide additional stability to panels as specifi cations shall be called to the attention of the architect
they prior to the installation of the operable wall.
are moved in and out of their storage location. B. Defi ciencies in the moveable glass wall opening shall be correct-
ed by others prior to installation of the moveable glass wall
2.09 TRACK SYSTEM system.
A. The KWV-Tec TRIMMED glass wall track system shall
4
07-15
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com