Page 184 - Arch binder

Operable Partitions KWV-Tec - TRIMLESS
10 22 26 (10650)
PART 2 - PRODUCT SPECIFICATION

2.01 ACCEPTABLE MANUFACTURER E. Panel Weight: Maximum panel weight shall not exceed 330 lb.
2
(150 kg) calculated at 7.35 lb. / ft. (36 kg / m ).
2
A. Moveable glass walls shall be CLEAR-DIVISIONS
KWV-Tec - TRIMLESS Individual panels as manufactured 2.03 OPERATION
by KWIK-WALL.
A. Operation shall be Individual Panels with a Multi-Directional
2.02 PANEL CONSTRUCTION track system, that allows the panels to negotiate 90°, “X”, “L”,
A. Panel Dimensions: Standard panel dimension shall be a nominal and “T” intersections as required for movement of panels from
storage location(s) to various installed positions. Panels shall
1 13/32 " [36] thick. be top supported by two (2) carriers featuring dual horizontal
B. Horizontal Top and Bottom Rails: Top and bottom rails shall be precision bearings with high strength polymer tires riding on
continuous one-piece extrusion manufactured of structural grade a structural aluminum track.
aluminum as engineered by HAWA with removable end caps.
®
Rails shall utilize a cam lock feature to provide positive mechanical 2.04 STACK ARRANGEMENTS
attachment to glass. (Passive friction type or adhesive applied A. Stack Type: Panel storage confi guration shall be (select):
rails shall not be allowed for safety reasons.)
1. Standard Perpendicular Stack: consisting of panels stacking
C. Bottom Rail Locking System: Each bottom rail glass retainer at a 90 angle perpendicular to the wall’s installed position.
o
shall contain (select):
2. Optional Parallel Stack: consisting of panels stacking parallel
1. Standard Operable Floor Lock: consisting of a face activated lever to the wall’s installed position.
located on one (1) side of the panel connected to a fl oor lock
that engages a recessed spring loaded dust-proof strike to Note: Parallel stacking confi guration may not be possible in every
provide stability and security when the moveable glass wall application. Due to minimum stacking / pocket clearances required,
prior approval of the parallel stacking confi guration shall be
system is setup in the extended position. Intermediate panels
shall have horizontal interconnecting foot-operated lock or approved by KWIK-WALL.
centering pin for additional stability and security. 3. Optional Remote Stack: consisting of panels located remotely
2. Optional Keyed / Thumb Turn Lock: consisting of key operated from the wall’s installed position, as shown on the submitted
cylinders on both sides or key operation on one (1) side and shop drawings.

thumb turn operation on opposite side. B. Stack Quantity: Panels shall be stored in designated stack area
as required for panel storage.
3. Optional Thumbturn: Consisting of an operable fl oor lock
operated by a thumb turn that engages a recessed spring loaded 2.05 FINISHES

dust-proof strike to provide stability and security when the A. Hardware Finish: Panel hardware including horizontal rails
moveable glass wall system is extended.
shall be fi nished of (select):
3
1
D. Glass: Panels shall be glazed with / 8" [10] or / 2" [12.7] tempered 1. Standard Finish: Clear Anodized Aluminum.
glass that is manufactured in accordance with ASTM C 1036-01,
ASTM C 1048-04, and ANSI Z97.1. Glass fi nish shall be (select): 2. Optional Finish: Custom Anodized per supplied sample
1. Standard Clear: consisting of clear tempered glass (select): 3. Optional Finish: Powder Coated Paint to any RAL color
3
a. / 8" [10] thick glass for Panel Heights up to 9'-0" (2.74 m). B. Pull Handle Finish: Handle fi nish shall be (select):
b. / 2" [12.7] thick glass for Panel Heights up to 10'-0" 1. Standard Finish: consisting of Stainless Steel Satin Effect fi nish.
1
(3.05 m). 2. Optional Finish: consisting of Pull Handle to match Hardware
2. Optional Smoked Bronze, Smoked Gray, Smoked Green, Finish selection (as close as possible).
Smoked White or Clear Satin Etched: consisting of tinted
laminated glass (select): 2.06 PERIMETER TRIM AND SEALS
a. / 8" [10] thick glass for Panel Heights up to A. Trim and Seals shall consist of (select):
3
9'-0" (2.74 m). 1. Standard Trimless: consisting of / 8" [10] or / 2" [12.7]
3
1
1
b. / 2" [12.7] thick glass for Panel Heights up to tempered glass with a sanded / beveled edge, resulting in a
10'-0" (3.05 m). minimal groove appearance between adjacent glass panels.
3. Optional Clear Satin Etched: consisting of translucent tempered 2. Optional Vertical Protective Edge Trim: consisting of
3
1
or laminated glass (select): / 8" [10] or / 2" [12.7] tempered glass with a sanded / beveled
edge utilizing a full vertical transparent protective edge trim
a. / 8" [10] thick glass for Panel Heights up to encapsulating the edge of the glass.
3
9'-0" (2.74 m).
3. Optional Vertical Protective Edge Trim with Brush Seal:
1
b. / 2" [12.7] thick glass for Panel Heights up to consisting of / 8" [10] or / 2" [12.7] tempered glass with a
1
3
10'-0" (3.05 m).
sanded / beveled edge utilizing a full vertical transparent
4. Optional Decorated or Patterned: consisting of / 8" [10] protective edge trim with light grey nylon brush seals to
3

tempered glass decorated or patterned as selected by designer. encapsulate the edge of the glass.
(Maximum Panel Height 9'-0" (2.74 m)).
4. Standard Top Seals: consisting of continuous contact black
nylon brush seals provided on both sides of each panel.
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com 05-16