Page 208 - Arch binder

Operable Partitions VARIOTEC - TRIMLESS
10 22 26 (10650)
PART 2 - PRODUCT SPECIFICATION

2.01 ACCEPTABLE MANUFACTURER 2.04 STACK ARRANGEMENTS
A. Moveable glass walls shall be CLEAR-DIVISIONS VARIOTEC A. Stack Type: Panel storage confi guration shall be (select):
TRIMLESS Individual Panels / Curve & Diverter as 1. Standard Perpendicular Stack: consisting of panels stacking at
manufactured by KWIK-WALL Company. a 90° angle perpendicular to the wall’s installed position.
2. Optional Parallel Stack: consisting of panels
2.02 PANEL CONSTRUCTION stacking parallel to the wall’s installed position.
A. Panel Dimensions: Standard panel dimension shall be a 3. Optional Remote Stack: consisting of panels located remotely
7
nominal 1 / 16" [36] thick. from the wall’s installed position, as shown on the
submitted shop drawings.
B. Horizontal Top and Bottom Rails: Top and bottom rails shall be
continuous one-piece extrusion manufactured of structural B. Stack Quantity: Panels shall be stored in designated stack area as
grade aluminum as engineered by Hawa with removable required for panel storage.
®
end caps. Rails shall utilize a cam lock feature to provide
positive mechanical attachment to glass. (Passive friction type 2.05 FINISHES
or adhesive applied rails shall not be allowed for safety reasons.) A. Hardware Finish: Panel hardware including horizontal rails shall
C. Bottom Rail Locking System: Each bottom rail glass retainer be fi nished of (select):
shall contain (select): 1. Standard Finish: Clear Anodized Brushed Aluminum.
1. Standard Operable Floor Lock: consisting of a thumb turn 2. Optional Finish: Dull Chrome Effect.
located on one (1) side of the panel connected to a fl oor lock 3. Optional Finish: Stainless Steel Satin Effect.
that engages a recessed spring loaded dust-proof strike to
provide stability and security when the moveable glass wall 4. Optional Finish: Custom Anodized per supplied sample.
system is setup in the extended position. Intermediate panels 5. Optional Finish: Powder Coated Paint to any RAL code.
shall have horizontal interconnecting foot-operated lock or B. Pull Handle Finish: Handle fi nish shall be (select):
centering pin for additional stability and security.
1. Standard Finish: consisting of Stainless Steel Satin Effect fi nish.
2. Optional Keyed / Thumb Turn Lock: consisting of key
operated cylinders on both sides or key operation on one (1) 2. Optional Finish: consisting of Pull Handle to match Hardware
side and thumb turn operation on opposite side. Finish selection (as close as possible).
Intermediate panels shall have horizontal interconnecting
foot operated locks or centering pin for additional stability 2.06 PERIMETER TRIM AND SEALS
and security. A. Trim and Seals shall consist of (select):
D. Glass: Panels shall be glazed with / 8" [10] or / 2" [12.7] 1. Standard Trimless: consisting of / 8" [10] or / 2" [12.7]
3
1
3
1
tempered glass that is manufactured in accordance with tempered glass with a sanded / beveled edge, resulting in a
ASTM C 1036-01, ASTM C 1048-04, and ANSI Z 97.1. minimal groove appearance between adjacent glass panels.
Glass fi nish shall be (select):
2. Optional Vertical Protective Edge Trim: consisting of
1. Standard Clear: consisting of clear tempered glass (select): / 8" [10] or / 2" [12.7] tempered glass with a sanded / beveled
1
3
a. / 8" [10] thick glass for Panel Heights up to 9'-0" (2.74 edge utilizing a full vertical transparent protective edge trim
3
m). encapsulating the edge of the glass.
1
b. / 2" [12.7] thick glass for Panel Heights up to 10'-0" 3. Optional Vertical Protective Edge Trim with Brush Seal:
1
3
(3.04 m). consisting of / 8" [10] or / 2" [12.7] tempered glass with a
sanded / beveled edge utilizing a full vertical transparent
2. Optional Clear Satin Etched: consisting of translucent protective edge trim with light grey nylon brush seals to
tempered glass (select):
encapsulate the edge of the glass.
3
a. / 8" [10] thick glass for Panel Heights up to 9'-0" (2.74 4. Optional Horizontal Top and Bottom Brush Seals: consisting
m).
of continuous contact black nylon brush seals provided
b. / 2" [12.7] thick glass for Panel Heightsup to 10'-0" on both sides of each panel.
1
(3.04 m).
E. Panel Weight: Maximum panel weight shall not exceed 330
lb. (150 kg) calculated at 7.4 lb. / ft. (36 kg /m ). Sliding
2
2
swing panel or sliding pivot panel shall not exceed 200 lb.
(90.7 kg)
2.03 OPERATION
A. Operation shall be Individual Panels / Curve & Diverter,
consisting of Individual Panels that are top supported by
two (2) carriers riding through radius Curve and
Diverter type intersections.

Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com 05-16