Page 94 - Arch binder

Operable Partitions
10 22 26 (10650) MODEL 3030 FINAL CLOSURE SYSTEMS

Optional Communicating Panel Closure
This fi nal closure panel is a full-sized panel (maximum
3'-0" [.9] wide x 10'-2" [3.10] high) which is hinged
permanently and directly to a structural wall. The
Communicating panel functions as a full height pass
door, incorporates an adjustable bottom seal and includes
a fl ush pull handle on each side of the panel.

Optional Lap Panel Closure
The fi nal closure is accomplished by two (2) panels equipped
with bulb seals for sealing against a rigid wall surface on one
(1) side, and a lap-type extrusion that overlaps with the
adjacent panel on the opposite side. The lap closure panel is
equipped with adjustable bottom seals and includes
a fl ush pull handle.

Optional Single Panel Expander Closure
The fi nal closure panel is equipped with an expander
mechanism in the same way as the more common expander
panel. The single panel expander shall be center hung
and capable of rotating 360 and, is equipped with an
o
adjustable bottom seal (standard) or (optional) operable
bottom seal and is used specifi cally with hinged pairs
operation, and includes a fl ush pull handle. (Maximum
panel height is 12'-2" [3.71]).

Optional Double Pocket Doors with
Expander Closure
The pocket door is equipped with an expander mechanism in
the same way as the more common expander panel. Rather
06-08
than being located on a wall panel, the expander saddle is
integrated into a pocket door panel. The saddle expander will
be fully retracted with a pair of bulb seals compressed against
the last panel exiting the stack. The pocket doors are provided
with fi xed bottom seals as a factory standard and includes a
foot bolt and fl ush pull handle.

Note: Horizontal details for numbers 1 - 10 referenced above
can be found on Pages 10 and 11.

9
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com 04-18
07-15