Page 94 - WHEELER FLEET SOLUTIONS PROMASTER CATALOG_2020_COMMERCIAL_Neat

ENGINE COMPONENTS

PART INFORMATION HIGHLIGHTED IN RED ARE SHOWN IN ILLUSTRATION,
BUT ARE NOT AVAILABLE ON USPS CONFIGURATIONS

ENGINE COMPONENTS

TECH TIP

NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE
TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385AS)
ARE ONE TIME USAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to
10/23/2015 requires Service Kit P/N 68461214AA; includes Transmission Isolator P/N 68264483AA, and Adaptation
Bracket 68264479AA, Fastener Service Kit P/N 68329056AA. Vehicles built after on or after 10/23/2015 will
require only the Fastener Service Kit P/N 68329056AA If the vehicle you are repairing has a crack in the flex plate inspect
the transmission dowel pin alignment holes in the transmission. If they are damaged the transmission should be replaced
to prevent further damage to the transmission/flexplate due the inability to properly align the engine to the transmission
during the repair. If vehicle won’t move and has noise/leaking from transmission bell housing area, check transmission
pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle
is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is okay, the codes
are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT
Actuator`s P/N 05184101A* must also be replaced.

89 PART NUMBERS MAY BE SUBJECT TO CHANGE. PLEASE CONTACT A WBI REPRESENTATIVE FOR PRICE AND AVAILABILITY