Page 62 - Priesgaisrine signalizacija FX 3NET_Schneider Electric_Projktavimo instrukcija_ENG

Planning Instruction 66571760GB0 Fire Detection 19

5. FX Settings and configuration

5.1 Settings in the FX panel

Settings on the FX-MC2 board

With settings on the FX-MC2 board, the following can be set and selected:
- The identification number of the panel in a multipanel system.
- Whether the alarm device lines, controlled by the MC should be pulsed or continuously sounding.
- Activation of the assistant processor

Panel ID
- can be 1…32
- only switch numbers 0…9
are used
- panel ID 15 = 1 and 5

Assistant processor setting
- jumper selection ON/OFF
- ON in seeing panel including
fire routing equipment =
jumper OFF
- factory setting:
function OFF = jumper ON

Settings on the FX-SLC board

With settings on the FX-SLC board, the following can be set and selected:
- The identification number of the SLC.

ID number jumper settings

ID

1.

2.

3. Loop 2 Loop 2 Loop 1
A+ A- B+ B- A+ A-
4.
© 2009 Schneider Electric. All rights reserved.

Schneider Electric Pelco Finland Oy Kalkkipellontie 6, 02650 Espoo, Finland Telephone: +358 10 446 511 Fax: +358 10 446 5103 www.pelco.com/nordic
Document Number 66571760GB0 49 2011