Page 11 - PowerPoint Presentation

Vinyl/polyester coatings

is a high performance vinyl ester coating, used for protection of steel and
is high performance putty, used for repairing of steel concrete. It has an excellent abrasion, impact resistance, long term corrosion
and concrete. It is a high strength thixotropic material protection with high thermal stability and impermeability. It is recommended
and can be applied up to 1 cm thickness without failure for tanks, absorption towers, heat exchangers and etc. It is suggested to use as
and cracking. a topcoat for vinyl ester and polyester lining.

is a high performance glass flake – filled coating, used
is a multipurpose bonding paste based on an epoxy vinyl-ester combined
for protection of steel and concrete. It has an excellent
with special additives. This adhesive is also used for the bonding of GRP
abrasion, impact resistance, long term corrosion
protection with high thermal stability and laminate where high requirement for adhesion is needed.
impermeability. It is recommended for tanks,
absorption towers, heat exchangers and etc. Main characteristics are:
- Based on epoxy vinyl-ester.
- High strength and toughness.
- Pre-accelerated bonding paste.
- Stable on vertical surfaces.
is suggested to use as a topcoat for polyester lining. It - Excellent resistance to crack.
has an excellent abrasion, impact resistance, long term - Applicable by hand or suitable equipments.
corrosion protection with thermal stability and - Provide excellent adhesion between GRP parts.
impermeability. It is recommended for tanks,
absorption towers, heat exchangers and etc.