Page 4 - 2018 LTC & MSE Catalogue
P. 4

M200-C FALL MONITORING SYSTEM
                            FOR SIDE CHAIRS AND WHEELCHAIRS
             M-200-C Fall Monitoring Systems comes with all the great features as the M-200 but is specially
             configured to address the individual needs of a patient in a side chair or wheelchair.

             Description
             • Battery operated
             • Two-year limited warranty
             • Non-latching alarm allows monitoring to restart automatically when
               individual’s weight is back on the Sensormat pad, and does not require
               caregiver intervention
             • Configured to automatically alarm when the patient gets up from the chair
             • Two-year limited warranty
             • Specially labeled to tell the user that the unit has been programmed for
               chair use only
          PATIENT MONITORING - CHAIR
             Product # M200-C-Kit
            CHAIR-CHECK® II

            The Chair-Check II control unit is used in conjunction with a Bed-Check® Sensormat® pad as a system to
            effectively monitor patients at risk of falling or residents in a bed, chair, wheelchair, or on a toilet. Chair-Check
            II provides an audible alarm to alert the caregiver when the person attempts to get up unassisted.
            Description
            • Monitor patient or resident in a chair, toilet, wheelchair, or bed, using any Bed- Check®Sensormat®pad
            • Control unit uses a 9V alkaline battery for a long usage life
            • Secured battery containment discourages tampering
            • Non-latching alarm allows monitoring to restart automatically when individual’s weight is back on
              the Sensormat pad, and does not require caregiver intervention
            • Configure Chair-Check II settings to the individual’s needs with 3 alarm tones, 2 volume settings, and a
               0–5 second delay
            • Two-year limited warranty

            FEATURES AND OPERATION

            • Monitoring begins automatically when the patient’s weight is placed on the
              Sensormat pad
            • Caregiver can put the system on Hold while repositioning the patient
            • Controls for hold, tone, and delay may be easily changed by the caregiver
            • Multiple tones allow the unit to be distinguished from other alarms
            • Low battery and charge alert. Secured battery access
            • 9V battery or AC operation allows for use in portable or fixed applications

            Product # 72010  Chair-Check II Control Unit

            SENSORMAT® PRESSURE SENSITIVE MATS

            Bed-Check's exclusive heat-seal bonds the Sensormat layers to greatly reduce the chance of
            moisture penetration. Mats are not susceptible to damage from cleaners.

            Product # 73010 Chair Pre-emptive - Pressure Sensitive Sensormat® 30 Day Warranty 10/Box
            Product # 73011 Chair Pre-emptive - Pressure Sensitive Sensormat® 90 Day  Warranty 5/Box
            Product # 93020 Standard 180-Day Chair Sensor Mat
            Product # 93030 Standard 1Year-Day Chair Sensor Mat

            CHAIR SENTINEL WHEELCHAIR ALARM
            The patient-releasable seat belt alarm that monitors patient safety even when
            out of staff’s view. The Chair Sentinel is a patient-releasable safety device.
            Releasing the belt causes a loud alarm signal to alert your staff.



            Product # R-7800   Chair Sentinel  With on/off switch
            Product # R-7810   Chair Sentinel  Without  on/off switch

             4                      www.ahsinc.ca  |  info@ahsinc.ca |  877.457.8012
   1   2   3   4   5   6   7   8   9