Page 311 - Birkdale Gate & Fencing 2017/18

LIGHTNING PROTECTION, SWITCHES AND SIGNS
Lightning Protection Systems
”Energisers for the operation of electric fence installations on pasture land may not be installed in buildings that are susceptible to re such as barns, hay lofts and stables.
To protect against lightning damage, a lightning protection system (spark gap with earthing) must be built into the fence lead-out before the introduction of that lead out cable into the building”.
Lightning diverter
International standard requirements:
Energiser
Earth con- nection
Fence lead out
Electric fence
Earth stakes Length 1- 2 m Spacing approx 3 m
WARNING SIGN
DESCRIPTION
LIGHTNING DIVERTER
DESCRIPTION
DESCRIPTION
DESCRIPTION
CODE
CODE
CODE
CODE
Caution:ElectricFence’ Internationalstandardsrequirethatwarning signs be placed at clearly visible points 50m apart, at junctions with byways, as well as at points where the existence of an electric fence would not be expected. Plastic printed both sides.
P160001
For mounting on a wall or fence post; protects your energiser by leading the lightening to the ground; required by international standards where energisers are installed indoors; order earth stakes and connecting cable separately.
P164801
CUTOUT SWITCH
Best Product
For switching the current on and off independently of the energiser and for switching individual paddocks on or off.
P160701
TWO-CIRCUIT FENCE SWITCH
To turn on and switch between two fence systems with one switch. Four positions are possible:
‘0’: both fences are turned off.
‘I’: Fence I is turned on.
‘II’: Fence 2 is turned on.
‘I+II’: both fences are turned on.
P160702
311
PATURA TOOLS & ACCESSORIES