Page 313 - Birkdale Gate & Fencing 2017/18

TENSION SPRING
By adding this spring mechanism to your fence you will reduce the load at the corners and provide for fluctuations in the tension of the fence regardless of air temperature. This product is often used with aluminium wire and narrow gauge wires <1.6mm. For heavier wires <2.5mm use larger model.
DESCRIPTION CODE
SAFETY COVER FOR TENSION SPRING
DESCRIPTION QTY CODE
PATURA rotating wire tensioner:
The clever way to tighten wires
PATURA’s rotating wire tensioner enables you to easily tighten wires without cutting them. The tensioner is inserted in the wire at any place on the fence, the wire tensioning handle is attached and the tensioner is turned around
its own axle until the correct fence tension is reached. Then the cotter pin is installed and the wire tensioner handle is removed. If necessary, the wire can be retightened and/or relaxed, at any time. Rotating wire tensioners must be installed in every section of the fence.
ROTATING WIRE TENSIONER
Allows rapid tensioning and detensioning of wires and rope without cutting them. Aluminium.
Light duty model for wires <1.6mm.
P162600
Heavy duty model for wires <2.5mm.
P162700
Prevents horses tails becoming caught in tension springs
3
P162903
PACK TYPE
WIRE TENSIONER HANDLE
DESCRIPTION
WIRE TENSIONERS WITH HANDLE
QTY CODE
CODE
CODE
Hang the wire tensioner handle in the wire, install the cotter pin and remove the wire tensioner handle.
Hanging card
3
P164303
Box outer
25
P164325
For operating the rotating wire tensioner, galvanised.
P644000
DESCRIPTION
Insert the rotating wire tensioner in the wire, attach the wire tensioner handle
Turn the wire tensioner handle until the correct fence tension is reached
Due to the light weight, the wire tensioner hangs lightly in the wire.
6 x rotating tensioners and 1 x tensioner handle.
P644001
313
PATURA TOOLS & ACCESSORIES
NEW