Page 12 - Kubota SSV & SVL Attachments Range Brochure

SG25 SKID GRADERS TR TRENCHERS DIRTWORKING

DIRTWORKING

TR48 TR60
Weight w/2 Pitch Cup Chain & Hydraulic
Side Shift (kg) 1,236 lbs (560.6) 1,300 lbs (589.7)
Overall Length (m) 90.5" (2.30) 102.5" (2.60)
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 /
SVL95-2s / SVL97-2 SVL95-2s / SVL97-2 Standard Boom Length (m) 65.5" (1.66) 77.5" (1.97)
Digging Depth at 60° (m) 4' (1.22 m) 5' (1.52 m)
Dual height grader Overall Width (m) 64" (1.63)
• Ripper teeth break compacted soils blades allow the grader to • Adjustable spoil auger
• Bi-directional blades; Adjustable cutting angles be adjusted to desired amount of • Manual or hydraulic sideshift Auger Diameter (cm) 15.5" (39.4)
• Replaceable skid shoes cultivation, leveling, & grading. • 6", 8", 10" Width chain options Side Shift Options (cm) Side Shifts from center to 22" (55.9) right of center
• Bucket carrier lugs on top • 4 teeth configurations Side Shift Travel (cm) 22" (55.9")
• Patented depth gauge Trenching Widths Available (cm) 6", 8", 10" (15.2, 20.3, 25.4)
Landscapers, contractors, and developers can SG2572 SG2584
Hydraulic Low Flow (lpm) 12-24 gpm (45.4 - 90.8)
level construction sites, prepare seedbeds, and Working Width (m) 72" (1.83) 84" (2.13) Used by rental yards, contractors, and developers to Motor Flow High Flow (lpm) 24-40 gpm (90.8 - 151.4)
rejuvenate driveways forwards or backwards. Overall Width (m) 81-1/4" (2.06) 93-1/4" (2.37) dig trenches for water, electrical, drainage, or footings Requirements
Chain Speed
Ripper teeth break compacted soils for a better Weight w/Shanks (kg) 886 lbs (401.9) 952 lbs (431.8) in many different soil conditions. (Depending on Low Flow 227-366 fpm (69-112)
(m/min)
finish. Number of Straight Shanks 6 7 Skid Steer Flow High Flow 221-373 fpm (67-114)
& Pressure
Ratings) (m/min)
Skid Steer & Tractor HP Requirement
(kw) 40-95 HP (29.8-70.8) Motor Case Drain Standard
Overall Length (m) 52-1/4" (1.33) Motor Reversible
Overall Height (cm) 22" (55.9) Heavy frame Chain Tightener Grease cylinder
Side Panel Height 15-1/2" (39.4) construction Crumber Shoe Floating
with Skid Shoes (cm) stands up to
Side Panel Length (m) 50" (1.27) everyday rugged use. Patented Depth Indicator Standard (Viewable from operator seat)
Roller Guide Bearings Self-contained, ball bearings with triple-lip seals
Side Panel Thickness (mm) 1/4" (6) Thick with at Boom Head & metal shroud covers
2-3/4" (7) formed edges
Full length, heavy-duty After loading the SG25 Machined and enclosed Drive Bearings Between Motor Self-contained, single & double row ball bearings
skid shoes are reversible onto a trailer, a bucket Skid Shoe Construction (mm) 3/8" (10) Thick with a formed bevel front bearings are & Drive Sprocket with extra heavy duty seals
to prevent gouging
and replaceable. can be mounted on top Cutting Edges (cm) Four 1/2" x 6" (1.3x15.2) high-carbon, protected against dirt Chain Options-Numerous Cup teeth on 2 or 4 pitch, scorpion w/cup teeth,
using the storage lugs, heat-treated blades that are reversible and and offer extended life. or alligator w/cup teeth
to save space. replaceable Frame Construction (mm) Heavy-duty 5/16" (8) thick w/ 3/4" (19) reinforced bar around
Cutting Edge Adjustment (cm) Variable vertical adjustment from level grade three sides of the bottom lock pin slots
to 1-1/2" (3.8) below grade
Trencher Chain (cm/kg) 2.00" (5.1) pitch. 50,000 lb (22,679.6)
tensile strength anti-flex

12 Available models and options can vary on a regional basis. Contact your local Kubota CE dealer for verification. CE ATTACHMENTS 13