Page 126 - Tenob Online Catalogue Volume 5 Systems
P. 126
M
Jack Plates
Hi-Jacker™ Jack Plate
two-piece
The Original - produced since 1980
T-H Marine brought this first, full production jack
plate to the recreational boating. The Hi-Jacker™
Jack Plate is the most recognized brand name in
the industry from the company that pioneered
the product.
This plate is constructed of tough 3/8" aircraft
aluminum and features a design that allows full
tilt with dual steering. Natural aluminum finish
resists corrosion. All bolts are stainless steel with
brass nuts to prevent galling. Fits all V-4 and V-6
engines up to a maximum of 150 Horsepower.
Provides six (6) inches of setback and four (4)
inches of vertical adjustment.
Part No. JP-4FA-DP
TRIM TABS AND BOW THRUSTERS Hydro-Jacker™
Hydraulic Jack Plate
1A26
Marine Direct T-H Marine offers one of the finest hydraulic jack
plate on the market today. This design features
an all enclosed hydraulic pump that contains the
lift cylinder and fluid in one compact unit. No
hydraulic hoses to run, no reservoirs to install, no
hoses to drill. Simply mount to the transom and
connect to power. The Hydro-Jacker™ is angled
at the top to allow most steering cylinder units to
clear the plate when fully tilting the engine. Two
sets of mounting holes on both the transom and
engine side gives additional options to mounting.
Treated sides and top retain clean looks even in
salt water. Available in two set-back sizes, 6" &
10". Position gauge kit is available for all sizes
(part# 6077). Easily handles all V6 outboards,
even the heaviest of the new 4-strokes (300hp
max).
Part No. HYJ-6-DP
Total Supply Solutions...
Jack Plates
Hi-Jacker™ Jack Plate
two-piece
The Original - produced since 1980
T-H Marine brought this first, full production jack
plate to the recreational boating. The Hi-Jacker™
Jack Plate is the most recognized brand name in
the industry from the company that pioneered
the product.
This plate is constructed of tough 3/8" aircraft
aluminum and features a design that allows full
tilt with dual steering. Natural aluminum finish
resists corrosion. All bolts are stainless steel with
brass nuts to prevent galling. Fits all V-4 and V-6
engines up to a maximum of 150 Horsepower.
Provides six (6) inches of setback and four (4)
inches of vertical adjustment.
Part No. JP-4FA-DP
TRIM TABS AND BOW THRUSTERS Hydro-Jacker™
Hydraulic Jack Plate
1A26
Marine Direct T-H Marine offers one of the finest hydraulic jack
plate on the market today. This design features
an all enclosed hydraulic pump that contains the
lift cylinder and fluid in one compact unit. No
hydraulic hoses to run, no reservoirs to install, no
hoses to drill. Simply mount to the transom and
connect to power. The Hydro-Jacker™ is angled
at the top to allow most steering cylinder units to
clear the plate when fully tilting the engine. Two
sets of mounting holes on both the transom and
engine side gives additional options to mounting.
Treated sides and top retain clean looks even in
salt water. Available in two set-back sizes, 6" &
10". Position gauge kit is available for all sizes
(part# 6077). Easily handles all V6 outboards,
even the heaviest of the new 4-strokes (300hp
max).
Part No. HYJ-6-DP
Total Supply Solutions...
