Page 27 - OPŠTE POPRAVKE KLANN

Kapitel_10.fm Seite 542 Mittwoch, 12. April 2017 9:15 09

Miscellaneous
HGV Highlights

KL-0040-2800
KL-0040-2800
Hydraulic Cylinder, 28t

Thanks to its special design as a hollow piston cylinder, the KL-0040-2800 hydraulic
cylinder (28t) can be used to perform pulling and pushing operations in conjunction
with the corresponding spindles available as accessories.
Application:
In conjunction with various GEDORE Automotive tools, the hydraulic cylinder
KL-0040-2800 can be used for the removal and installation of drive shafts, wheel
hubs, wheel bearings, silentblocs and suspension ball joints.
Technical Data:
Maximum admissible force: 285kN (28t)
Maximum stroke: 50mm
Maximum volume of oil: 216.3cm³
Maximum oil pressure: 700bar
Piston area: 40.6cm²
Thread in tubular piston: M24
Retaining thread (pushing side): 2¾“-16 UNS
Retaining thread (pulling side): M42x2
Cylinder outer diameter: 99mm
Cylinder overall length (piston retracted): 235mm
Note:
Cylinder overall length (piston extended): 285mm
A hydraulic pump is required to drive the hydraulic cylinder
Hydraulic fluid connection thread: 3/8“ NPT
KL-0040-2800.
Weight: 9.6kg
KL-0215-35 M28
KL-0215-35 M28
Hydraulic Hand Pump
The KL-0215-35 M28 hydraulic hand pump is designed to be used as a drive for the
hydraulic cylinder KL-0040-2800.
The hydraulic pressure and necessary force can be monitored while operating the
pump at pressure gauge KL-0040-2829 (supplied with the tool set). The pressure
gauge features an additional tonne scale which is specifically adapted to our
KL-0040-2800 hydraulic cylinder (28t).
Scope of Delivery:
KL-0215-35 M28 Hydraulic Hand Pump
Part No. Description Qty
Technical Data:
KL-0215-33 Hydraulic Hand Pump (without hose) 1
Weight: 7.5kg KL-0215-31 Hydraulic Hose, 1.8m, with Hose-Side Connector 1
Max. Pressure: 700bar KL-0215-322 Cylinder-Side Connector, 1/4" NPT 1
KL-0040-2520 Adaptor, 3/8" NPT to 1/4" NPT 1
KL-0040-2829 Pressure Gauge 1

(542) Copyright GEDORE Automotive GmbH, Germany
formerly