Page 15 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 91 Freitag, 7. April 2017 10:54 10

Wheel Bearings

KL-0040-2500 KL-0040-2500
Hydraulic Cylinder (17t)

Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic
cylinder (17t) can be used to perform pulling as well as pushing operations in
conjunction with the corresponding spindles available as accessories.
Range of Use:
In conjunction with various GEDORE Automotive tools, the hydraulic-cylinder (17t)
Note:
KL-0040-2500 can be used for the removal and installation of drive shafts, wheel
A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500.
hubs, wheel bearings, silentblocs and suspension ball joints.
For accessories such as coupling, hydraulic pump, pressure gauge etc.,
please refer to chapter 4 in this Catalogue.
Technical Data:
Maximum admissible force: 170kN (17t)
Maximum stroke: 45mm
Maximum oil pressure: 700bar
Maximum volume of oil: 122cm³ 3
Piston area: 27cm²
Thread in hollow piston: M20
Retaining thread (pushing side): 2¼“-14 UNS
Retaining thread (pulling side): M42x2
Cylinder external diameter: 80mm
Cylinder overall length (piston retracted): 202mm
Cylinder overall length (piston extended): 247mm
Hydraulic fluid connection thread: 3/8“ NPT
Weight: 5.2kg

KL-0040-2500 K
Hydraulic Cylinder (17 t), in a Plastic Storage Case
Like the KL-0040-2500, but supplied in a Plastic Storage Case.

KL-0039-1003 KL-0039-1003
Retaining Adaptor with O-Rings,

for Hydraulic Cylinder
This adaptor is needed to retain the various KL-0039-.. and KL-0043-.. pressure/
support sleeves if these are to be used with the hydraulic cylinder KL-0040-2500.
(Connection thread: M42x2)

KL-0039-1005 KL-0039-1005

Adaptor, Ø 35mm
The KL-0039-1005 adaptor upgrades the KL-0040-2500 GEDORE Automotive
hydraulic cylinder (17t) by making it suitable also for use on the tools of the wheel
bearing/silentbloc tool series having an internal retaining Ø of 35mm. For this, the
KL-0039-1003 retaining adaptor is also necessary.
Technical Data:
External Ø: 35mm
Internal Ø: 20.5mm
Height: 16mm

KL-0039-1002 KL-0039-1002
Retaining Adaptor with O-Rings,

for Clamping Nut and Pressure Spindle
This adaptor is necessary for retaining the various pressure/support sleeves of the
KL-0039-.. and KL-0043-.. Series.
Retaining Ø for clamping nut or pressure spindle: 20mm

Copyright GEDORE Automotive GmbH, Germany (91) 3.1-12
formerly