Page 15 - KAROSERIJA I UNUTRAŠNJOST KLANN

Kapitel_9.fm Seite 505 Dienstag, 11. April 2017 10:27 10

KL-0372-70 KL-0372-70
Spring Clip
for Protecting Sleeve/Steering Lock (2 units), Mercedes

Suitable for Mercedes W129, W140, W210 and W202 with FBS2 ignition switch
system.
The spring clip KL-0372-70 is required to push both locking bolts into the steering lock
in order to enable the removal of the protecting sleeve with the ignition starter switch
from the steering lock. The set consists of 2 spring clips made of NIROSTA®-Steel.

KL-0372-3 KL-0372-3
Set of Pulling Hooks (long), Mercedes

Suitable for Mercedes W116, W123, W124, W126, W129, W140, W201, W202,
W203, W208, W209, W210, W211, W220, W230 as well as VW Crafter.
For removing the instrument cluster.

KL-0191-10 KL-0191-10
Special Screwdriver Bit Socket

with Bore, Torx® T30
Suitable for removal and installation of airbags on BMW, Mercedes etc.
The screwdriver bit socket KL-0191-10 is hollow bored on the inside to retain the
special Torx® screws found on airbags.
Thanks to the special tool length of 85mm, the airbag mounting screws can easily be
reached.

Technical Data:
Length: 85mm
Drive: 1/4"
Weight: 22g
® = reg. trademark of Acument Intellectual Properties, LLC. USA

KL-0191-11 KL-0191-11
Special Screwdriver Bit Socket, Torx® T30

Suitable for removal and installation of airbags on VW, Audi A4 (models
‘96-‘05), Opel/Vauxhall, Renault etc.
The screwdriver bit socket KL-0191-11 is suitable to retain the conventional Torx®
screws on airbags. Socket is not hollow-bored on the inside.

Technical Data:
Length: 85mm
Drive: 1/4" 9
Weight: 22g
® = reg. trademark of Acument Intellectual Properties, LLC. USA

Copyright GEDORE Automotive GmbH, Germany
formerly