Page 6 - KAROSERIJA I UNUTRAŠNJOST KLANN

Kapitel_9.fm Seite 496 Dienstag, 11. April 2017 10:27 10

Car Body and Interior

KL-0570-20
KL-0570-20
Special Torx® Socket T80 (with bore)

Suitable for BMW E31, E38 and E39.
Necessary for the removal and installation of windscreen wiper arms. It can also be
Technical Data: used for adjusting the contact pressure, for example, when replacing the windscreen.
This special Torx® socket is hollow-drilled on the inside to retain the wiper arm
Drive: 1/2"
bearing shaft.
® = reg. trademark of Acument Intellectual Properties, LLC. USA
KL-0049-300
KL-0049-300
Slide Hammer Puller, 4.8kg (Base Tool)

The ideal tool for extracting stuck or tight-fitting components such as half-shafts,
universally jointed drive shafts, injector nozzles etc. It is used in conjunction with the
respective adaptors and puller bolts.

Scope of Delivery: KL-0049-300 Slide Hammer Puller, 4.8 kg (Base Tool)
Part No. Description Qty
KL-0049-3001 Pull Rod for KL-0049-3 1
KL-0049-3002 Hammer Weight, 4.8kg, for KL-0049-3 1
KL-0049-3003 Handle for KL-0049-3 1
KL-0049-3004 Hex Nut, M18 1

KL-0049-3020
KL-0049-3020
Hook

Used in conjunction with the slide hammer puller KL-0049-31 for pulling chassis parts.

KL-0049-350
KL-0049-350
Clip with Hook and Joint

Designed to pull car body panels. Used in conjunction the slide hammer puller
KL-0049-31 or KL-0049-300.
The forged clip KL-0049-3500 has an automatic self stress on the cone. Its field of
Scope of Delivery: KL-0049-350 Clip with Hook and Joint
application is a pulling force of up to 20t.
Part No. Description Qty
The forged hook KL-0049-3501 made of hardened and tempered steel is suitable to
KL-0049-3500 Clip 1
any chain end of any make. When the chain is moved or remounted, it does not twist
KL-0049-3501 Hook 1
but it runs back parallel to itself. The clip KL-0049-3500 is connected to slide hammer
KL-0049-3502 Joint M18 1
puller KL-0049-31 or KL-0049-300 by means of the hook KL-0049-3501 and joint
KL-0049-3502.
KL-0270-31 C
KL-0270-31 C
Bit Wrench, Angled, (Reinforced Design),
with 8 Bit Inserts

Suitable for Mercedes Toe Adjustment, e.g. on 190 Series (W201), C-Class (W202),
C-Class (W203), 200-300 E (W124), E-Class (W210, W211), S-Class (W220).
The KL-0270-31 C wrench is the ideal tool for setting the toe at the rear axle.
Due to its special shape, this tool allows the user to easily and accurately turn the
adjusting screw which is particularly hard to access.
9 Technical Data:

Lenght: 320mm
Bit Insert: T30, T40, T45, T50, T55, XZN-8, XZN-10, XZN-12
Bit Insert (height): 20mm
Bit Drive: 5/16"
Weight: 500g
® = reg. trademark of Acument Intellectual Properties, LLC. USA

Copyright GEDORE Automotive GmbH, Germany
formerly