Page 18 - AirFlo's Installation Guide R80207

MOUNTING BAR
FLANGE
FIGURE 3.1
A Division of Stein Industries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
DMF: ---PC00167, PC1410,PC1038 FILE: R20109-1.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS CREATEDBY:creed CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you DRAWING/PART NUMBER:
REV. DATE: 6/2/2013 SHEET
DATE: 2/27/2009 2OF5 REV:
REAR PIN
FIGURE 2.1
FIGURE 2.2
FRONT PIN BASE RACK
STEP 2
INSTALLTHEBASERACK. POSITION THE RACK BY FIRST RESTING THE REAR RACK PINS ON THE MOUNTING BAR OR IN THE HOLES IN THE BACK OFYOURCASE. THENSLIDINGTHE RACK TOGETHER AND PLACING THE FRONT PINS INTO THE MOUNTING HOLES ON THE FRONT OF THE CASE SEE FIGURE 2.1 & 2.2
PLEASE NOTE THAT THE CASE SHOWN HAS A REAR MOUNTING BAR. YOURCASEMAYNOTHAVE ONE. IFYOURCASEDOESNOT HAVEAMOUNTINGBAR, USETHE HOLES IN THE BACK OF THE CASE TO REST THE PINS IN.
STEP3
HANG THE UPPER RACK ON THE MOUNTING BAR USING THE FLANGE ON THE REAR OF THE RACK.
SEE FIGURE 3.1 & 3.2
FLANGE
MOUNTINGBAR
FIGURE 3.2
TITLE: INSTALL GUIDE, REAR HANG VERTICAL MERCHANDISING RACK
receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
R20109-1
B