Page 19 - AirFlo's Installation Guide R80207

A Division of Stein Industries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
DMF: ---PC00167, PC1410,PC1038 FILE: R20109-1.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS CREATEDBY:creed CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you DRAWING/PART NUMBER:
REV. DATE: 6/2/2013 SHEET
DATE: 2/27/2009 3OF5 REV:
FIGURE 4.1
FIGURE 3.1
FIGURE 4.2
STEP 4
INSERT PLUGS INTO SLOTS WHERE THE UPPER RACK AND SLIDE RACK OVERLAP TO LOCK IN A POSITION. PLACE THESE PLUGS IN BOTH SIDES OF THE RACK.
SEE FIGURE 4.1 & 4.2
PLUG
RACK BODY AND RACK SLIDE FLEXIBLE SLOTS
PIN
PIN HOLE ON BASE RACK
FIGURE 4.2
TITLE: INSTALL GUIDE, REAR HANG VERTICAL MERCHANDISING RACK
receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
R20109-1
B
STEP 3
SLIDE THE BOTTOM OF THE RACK OUT SO THE PINS IN THE BOTTOM OF THE VERTICAL RACK SLIDE INSERT INTO THE HOLES ON THE BASE RACK
SEE FIGURE 3.1