Page 49 - Chevrolet Catalog

Brakes - Booster Items & Master Cylinders Page

Brakes - Front Disc / Drum 47
INL12555 INL12556

64-74 M/C Rod Assembly
64-66 Drum Master Cap
Pn# - INL12441 - 1pc $51.50 Ea
64-66 Dual Master Kit
Pn# - INL12555 - 1pc $16.00 Ea 1964-72 A-body, 67-69 F-body, 68-74 X-body, Manual Disc or Pn# - BLK102LP - Set $69.00 ea
1964-66 GM A-body Factory Single Master Cylinder Cap with
Manual Drum Master Cylinder Push Rod Assembly - Used when
Brakes, Front / Rear Pn# - INL12556 - 1pc $19.50 Ea INL10874 Manual Master Boot INL12439 Pn# - BLK103LP - Set $69.00 ea
converting to manual disc or if the car is manual drum.
correct lettering. This will only work on the original masters.
64-65 A-body dual master cylinder block and lines. Used to
67-74 Drum Master Cap
convert to dual master or disc brakes - installs with factory lines.
1967-74 GM A-body Factory Single Master Cylinder Cap with
66 A-body dual master cylinder block and lines. Used to convert to
correct lettering. This will only work on the original masters.
dual master or disc brakes - installs with factory lines.
BLK101
BLK100
INL13026
Pn# - INL10874 - 1pc
$12.00 Ea
1964-77 A-body, 1967-79 F-body, 1964-79 X-body GM Manual
Disc or Manual Drum Master Cylinder Push Rod Rubber Boot.
Used to hold push rod in the correct location & seal the firewall.
INL13027
64-79 Master Cylinder Cup 64-66 Brake Line Tee Block
67-69 Gm M/C Cap & Seal Pn# - INL12439 - 1pc $16.75 Ea Pn# - BLK100 - 1pc $18.00 ea
Pn# - INL13026 - 2pc $19.00 Set 1964-72 A-body, 67-79 F-body, 68-74 X-body, Manual Disc or 64-65 A-body stock single master cylinder brake distribution block.
Manual Drum Master Cylinder Cup - Used to hold the push rod in
1967-1969 GM (All Models) Disc Brake Master Cylinder Lid & place at the back of the master cylinder.
Cap. Factory correct with writing - Service With Delco Parts & Pn# - BLK101 - 1pc $18.00 ea
Use SAE J1703 Brake Fluid Delco. 66 A-body stock single master cylinder brake distribution block.
70-74 Gm M/C Cap & Seal
Pn# - INL13027 - 3pc $24.00 Set
1970-74 GM (All Models) Disc Brake Master Cylinder Lid, Cap &
Strap. Factory correct with writing - Use Only Dot 3 Fluid from a
Sealed Container & Warning Clean Filler Cap Before Removing. 64-74 Master Cylinder Rod
Pn# - INL12440 - 1pc $16.75 Ea BLK102 BLK103
1964-72 A-body, 67-69 F-body, 68-74 X-body, Manual Disc or
Manual Drum Master Cylinder Push Rod - Used on manual 64-66 Brake Line Tee Block
brakes to push the piston of the master cylinder.
Pn# - BLK102 - 1pc $35.00 ea
64-65 A-body dual master cylinder brake distribution block.
INL13275 INL13276
Pn# - BLK103 - 1pc $35.00 ea
67-69 Replacement MC Lid 66 A-body dual master cylinder brake distribution block.
Pn# - INL13275 -1pc $12.00 Ea TE-10
1967-69 GM A / F/ X Disc Brake Gold Zinc Replacement Master INL13279 INL13280 TE-12
Cylinder Lid with rubber seal. Lid sometimes comes in with writing 67-78 MC Rebuild Kit Deep TE-02
on them and other times with no writing. So assume no writing. TE-01
67-69 Replacement MC Seal Pn# - INL13279 - Set $38.00 Set
1967-78 GM Disc Brake 1 1/8" Bore Master Cylinder Rebuild Kit.
Pn# - INL13276 -1pc $6.00 Ea Deep hole for booster pin.
1967-69 GM A / F/ X Disc Brake Master Cylinder Lid Rubber Pn# - INL13280 - Set $38.00 Set
Seal. This seal is exact to the factory originals.
1967-78 GM Disc Brake 1 1/8" Bore Master Cylinder Rebuild Kit.
Shallow hole for booster pin. Inverted Flare Brass Tee
Pn# - TE-01 - 1pc $4.75 ea
Brass Tee Block 3/8-24 Female Thread All Sides for 3/16" Tube
Pn# - TE-02 - 1pc $4.75 ea
Brass Tee Block 7/16-24 Female Thread All Sides for 1/4" Tube
M/C Clevis Lock Nut
Pn# - TE-10 - 1pc $4.75 ea
Pn# - INL12968 - 1pc $2.00 Ea 67-78 MC Rebuild Kit 1" Brass Tee Block 1/2-20 Female Thread All Sides for 5/16" Tube
1964-72 GM A-body Chevelle, GTO, 442, GS, 1967-69 F-body
Firebird / Camaro, 1968-74 X-body Nova, Ventura, Manual or Pn# - INL13281 - Set $38.00 Set Pn# - TE-12 - 1pc $4.75 ea
Power Brake Pedal Clevis Spring Zip On Nut. On all factory cars 1967-78 GM Disc or Drum Brake 1" Bore Master Cylinder
to prevent the rod from spinning, so the clevis does not fall off. Rebuild Kit.Deep hole for brake pedal pin. Brass Tee Block 5/8-18 Female Thread All Sides for 3/8" Tube
Order Line 800. 385. 9452 15066 Technology Dr
Tech Support 586. 532. 1338 Shelby Twp, MI 48315
www.Inlinetube.com