Page 61 - Oldsmobile Catalog

Pressure Fuel Hoses / Fuel Injection Hoses Page
60
New Fuel Hoses

INF217

INF216

INF215

INF076

INF079 INF3801 TO INF1406

INF217 1/4" Pipe Pump / 5/8-18 Inv Flare / 7 1/2" 3/8" Hose For 3/8" Fuel Line $15.00
INF216 1/4" Pipe Pump / 5/8-18 Inv Flare / 9" 3/8" Hose For 3/8" Fuel Line $15.00
INF215 1/8" Pipe At Pump / 1/2-20 Inv Flare / 9.25" 5/16" Hose For 5/16" Fuel Line $15.00
INF076 1/8" Pipe At Pump / 1/2-20 Inv Flare / 8.25" 1/4" Hose For 5/16" Fuel Line $13.50
INF079 1/8" Pipe At Pump / 1/2-20 Inv Flare / 6.75" 1/4" Hose For 5/16" Fuel Line $13.50
On 1940’s and 1950’s cars the fuel pump was pipe thread and the fuel lines had fittings on the ends of the lines. This
configuration required a short fuel line to screw into the pump, then to the line. These flexible jumpers have long
been discontinued, but are now available again in a variety of sizes only at Inline Tube.

INF3801 1/4" Pipe Pump / 5/8-18 Inv Flare / 7" 3/8" Hose For 3/8" Fuel Line $25.00
INF3802 1/4" Pipe Pump / 5/8-18 Inv Flare / 9" 3/8" Hose For 3/8" Fuel Line $25.00 Straight Length, Fab Tools, Fuel Injection
INF3803 1/4" Pipe Pump / 5/8-18 Inv Flare / 11" 3/8" Hose For 3/8" Fuel Line $26.00

INF5161 1/4" Pipe Pump / 1/2-20 Inv Flare / 7" 5/16" Hose For 5/16" Fuel / Return Line $25.00
INF5162 1/4" Pipe Pump / 1/2-20 Inv Flare / 9" 5/16" Hose For 5/16" Fuel / Return Line $25.00
INF5163 1/4" Pipe Pump / 1/2-20 Inv Flare / 11" 5/16" Hose For 5/16" Fuel / Return Line $26.00

INF1401 1/8" Pipe At Pump / 1/2-20 Inv Flare / 7" 1/4" Hose For 5/16" Fuel / Return Line $25.00
INF1402 1/8" Pipe At Pump / 1/2-20 Inv Flare / 9" 1/4" Hose For 5/16" Fuel / Return Line $25.00
INF1403 1/8" Pipe At Pump / 1/2-20 Inv Flare / 11" 1/4" Hose For 5/16" Fuel /Return Line $26.00
INF1404 1/8" Pipe At Pump / 7/16-24 Inv Flare / 7" 1/4" Hose For 1/4" Fuel / Return Line $25.00
INF1405 1/8" Pipe At Pump / 7/16-24 Inv Flare / 9" 1/4" Hose For 1/4" Fuel / Return Line $25.00
INF1406 1/8" Pipe At Pump / 7/16-24 Inv Flare / 11" 1/4" Hose For 1/4" Fuel / Return Line $26.00

These hoses are rated up to 80 psi and can also be used for fuel injected applications. OAL length is measured from very end to
end. Custom lengths can also be made for $2.50 per inch, with at a minimum of 10 inches. Custom jobs can also be quoted, simply
call tech support 586 532 1338.
Inline tube has taken this project one step further and made all the common configurations to fit the current fuel line sizes up to 3/
8". This means if you have a muscle car with a pipe thread, carter fuel pump or just want to be able to take apart components with
out cutting hoses; this product was made thinking of you. Most cars have a short piece of hose with clamps that once they are
installed the only way to get them apart is to cut a hose. Now you can screw the system together and if a component needs to be
switched out it is as simple as un-bolting the line. This is the most professional connection on the market.

Fuel Injection Hoses
Inline tube can make all your rubber to metal line connections; connections include all fuel
injected applications, 5/16", 3/8" in 45 degree double flare, -AN 37 degree and pipe thread. If
you are putting a fuel injected crate engine in a classic, this is the application you will need
to connect the main fuel line to the fuel rail. The system is pressurized, so a hose clamp will
not be enough to hold its pressure.
When placing an order: remember to give the length of the hose and the two end fittings.

Order Line 800. 385. 9452
Tech Support 586. 532. 1338
www.Inlinetube.com