Page 1 - Shipping Bend Removal Guide

Removing Shipping Bends

Shipping bends are required on all lines over 6 feet in length to keep your shipping costs as low
as possible while delivering a quality product. Straighten the line between the white tags. The
bend will roll out by following these few steps. Large bends do not stress the lines, so the tube
will become completely straight.

Step 1: A shipping bend is about the radius of a 5 gallon bucket.

Step 2: Position the tube on the floor keeping the bend perpendicular while using the floor as a
straight edge. Roll the tube flat against the floor working out most of the bend

Step 3: Roll the tube against the floor or desktop making it as straight as possible.

R e m o v e S h i p p i n g B e n d s P a g e 1 | 2