Page 47 - Mopar Catalog

Pressure Fuel Hoses / Fuel Injection Hoses Page
46
New Brass items

INF217

INF216

INF215

INF076

INF079 INF3801 TO INF1406

INF217 1/4" Pipe Pump / 5/8-18 Inv Flare / 7 1/2" 3/8" Hose For 3/8" Fuel Line $15.00
INF216 1/4" Pipe Pump / 5/8-18 Inv Flare / 9" 3/8" Hose For 3/8" Fuel Line $15.00
INF215 1/8" Pipe At Pump / 1/2-20 Inv Flare / 9.25" 5/16" Hose For 5/16" Fuel Line $15.00
INF076 1/8" Pipe At Pump / 1/2-20 Inv Flare / 8.25" 1/4" Hose For 5/16" Fuel Line $13.50
INF079 1/8" Pipe At Pump / 1/2-20 Inv Flare / 6.75" 1/4" Hose For 5/16" Fuel Line $13.50
On 1940’s and 1950’s cars the fuel pump was pipe thread and the fuel lines had fittings on the ends of the lines. This
configuration required a short fuel line to screw into the pump then to the line. These flexible jumpers have long been
discontinued, but are now available again in a variety of sizes only at Inline Tube.

INF3801 1/4" Pipe Pump / 5/8-18 Inv Flare / 7" 3/8" Hose For 3/8" Fuel Line $25.00
INF3802 1/4" Pipe Pump / 5/8-18 Inv Flare / 9" 3/8" Hose For 3/8" Fuel Line $25.00
INF3803 1/4" Pipe Pump / 5/8-18 Inv Flare / 11" 3/8" Hose For 3/8" Fuel Line $26.00
Hoses INF5161 1/4" Pipe Pump / 1/2-20 Inv Flare / 7" 5/16" Hose For 5/16" Fuel / Return Line $25.00

INF5162
$25.00
1/4" Pipe Pump / 1/2-20 Inv Flare / 9"
5/16" Hose For 5/16" Fuel / Return Line
$26.00
5/16" Hose For 5/16" Fuel / Return Line
INF5163
1/4" Pipe Pump / 1/2-20 Inv Flare / 11"
Brake INF1401 1/8" Pipe At Pump / 1/2-20 Inv Flare / 7" 1/4" Hose For 5/16" Fuel / Return Line $25.00
1/8" Pipe At Pump / 1/2-20 Inv Flare / 9"
1/4" Hose For 5/16" Fuel / Return Line
INF1402
$25.00
1/4" Hose For 5/16" Fuel /Return Line
1/8" Pipe At Pump / 1/2-20 Inv Flare / 11"
INF1403
$26.00
Stainless INF1404 1/8" Pipe At Pump / 7/16-24 Inv Flare / 7" 1/4" Hose For 1/4" Fuel / Return Line $25.00
INF1405
1/4" Hose For 1/4" Fuel / Return Line
$25.00
1/8" Pipe At Pump / 7/16-24 Inv Flare / 9"
& INF1406 1/8" Pipe At Pump / 7/16-24 Inv Flare / 11" 1/4" Hose For 1/4" Fuel / Return Line $26.00
These hoses are rated up to 80 psi and can also be used for fuel injectED applications. OAL length is measured from very end to
OEM end. Custom lengths can also be made for $2.50 per inch with at a minimum of 10 inches. Custom jobs can also be quoted, simply
call tech. support 586 532 1338.
Inline tube has taken this project one step further and made all the common configurations to fit the current fuel line sizes up to 3/8".
This means if you have a muscle car with a pipe thread, carter fuel pump, or just want to be able to take apart components with out
cutting hoses; this product was made thinking of you. Most cars have a short piece of hose with clamps, but once installed the only
way to get it apart is to cut the hose. Now you can screw the system together and if a component needs to be switched out it is as
simple as un-bolting the line. This is the most professional connection on the market.
Fuel Injection Hoses
Inline tube can now make all your rubber to metal line connections. These connections include
all fuel injected applications, 5/16", 3/8" in 45 degree double flare, -AN 37 degree, and also
pipe thread. If you are putting a fuel injection crate engine in a classic; this is the application
you will need to connect the main fuel line to the fuel rail. The system is pressurized so a hose
clamp will not be enough to hold in the pressure.
When placing an order: remember to give the length of the hose and the two end fittings.

Order Line 800. 385. 9452
Tech Support 586. 532. 1338
www.Inlinetube.com