Page 23 - Proyecto integrador final - Génesis Orozco Chauca

digitalWrite(f, LOW);
CÓDIGO: digitalWrite(g, HIGH);
int a = 2; digitalWrite(h, LOW);
int b = 3; digitalWrite(i, HIGH);
int c = 4; delay(5000);
int d = 5; //Y
int e = 6; digitalWrite(a, HIGH);
int f = 7; digitalWrite(b, LOW);
int g = 8; digitalWrite(c, HIGH);
int h = 9; digitalWrite(d, LOW);
int i = 10; digitalWrite(e, HIGH);
void setup() digitalWrite(f, LOW);
{ digitalWrite(g, HIGH);
pinMode(a, OUTPUT); digitalWrite(h, LOW);
pinMode(b, OUTPUT); digitalWrite(i, LOW);
pinMode(c, OUTPUT); delay(5000);
pinMode(d, OUTPUT); //Z 3,5 cm 5,6 cm
pinMode(e, OUTPUT); digitalWrite(a, HIGH);
pinMode(f, OUTPUT); digitalWrite(b, LOW);
pinMode(g, OUTPUT); digitalWrite(c, HIGH);
pinMode(h, OUTPUT); digitalWrite(d, HIGH);
pinMode(i, OUTPUT); digitalWrite(e, HIGH);
} digitalWrite(f, HIGH);
void loop() digitalWrite(g, HIGH);
{ digitalWrite(h, LOW);
//X digitalWrite(i, HIGH);
digitalWrite(a, HIGH); delay(5000);
digitalWrite(b, LOW); }
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, HIGH); DISEÑO

23