Page 50 - Seametrics Product Catalog 2015_062415

IP100/200-SERIES
Insertion Paddlewheel Flow Sensor

DIMENSIONS

3.950”
10.033 cm

IP110 (Brass/SS) = 10.88”(27.64 cm) IP150 (Brass/SS) = 17.75" (45.09 cm)
IP110 (PVC) = 11.88“ (30.18 cm) IP150 (PVC) = 18.75” (47.63 cm)
IP210 (Brass/SS) = 15.88”(40.34 cm)
IP210 (PVC) = 16.88”(42.88 cm) IP250 (Brass/SS) = 21.75" (55.25 cm)
IP250 (PVC) = 21.75" (57.79 cm)
(11.88” PVC)
(16.88” PVC) (18.75” PVC)
(22.75” PVC)

HOT TAP INSTALLATION HOT TAP REMOVAL

Insertion and removal under pressure is possible due to
the 2” full-port isolation valve, which comes with a nipple
for installation on the pipe fitting. If it is necessary to
do the initial installation under pressure, any standard
hot tap drilling machine with 2” NPT adapter, such as a
Transmate or a Mueller, can be used. Ordinarily, it is not
necessary to use an installation tool, since the small-
diameter tube can be controlled by hand at all but the
highest pressures.

FLOW RANGE

GPM Min (.3ft/sec) 3” 4” 6” 8” 10” 12” 16” 18” 24” 30” 36” 40”
LPM Min (.09m/sec) 6.6 12 27 47 73 106 188 238 422 660 951 1,174
GPM Max (30ft/sec) 24.98 45.42 102.21 177.91 276.34 401.25 711.66 900.93 1597.44 2498.37 3599.93 4444.07
LPM Max (9.1m/sec) 660 1200 2700 4700 7370 10600 18800 23800 42200 66000 95100 117400
2498.37 4542.49 10220.61 17791.44 27898.48 40125.36 71165.74 90092.80 159744.40 249837.20 359992.70 444407.30

Approximations based on Schedule 40 pipe.

37