Page 33 - 365411 Findley 92pp A4 PBound.pdf

* Modern
Size
Minimum pitch** Maximum pitch Minimum lap
Maximum gauge
Tile thickness
Cover width
Hanging length
Covering capacity (net)
Weight of tiling (approx.)
Battens required (net)
Batten size recommended
Fixings
Fixing clips
Authority
420mm x 330mm
22.5° (75mm lap)
90°
17.5° (100mm lap)
Modern Antique
Brown
(granular finish)
Modern Smooth
Brown
(smooth finish)
33
75mm (22.5° and above)
100mm (below 22.5°) 345mm
30mm (nominal) 292mm (nominal) 397mm (nominal)
9.9 slates/m2 at 75mm lap 10.7 slates/m2 at 100mm lap
50 kg/m2 (0.49 kN/m2) at 75mm lap 54 kg/m2 (0.53 kN/m2) at 100mm lap
2.9 lin.m/m2 at 75mm lap 3.1 lin.m/m2 at 100mm lap
38 x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534)
50 x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Tile nails (50 x 3.35mm)
Eaves, verge and tile clips, SoloFix BS EN 490
Modern Mosborough
Red
(smooth finish)
Modern Old English
Dark Red
(smooth finish)
Modern Smooth Grey
(smooth finish)
* Theminimumrecommendedpitchandlapmaybeinfluencedbyspecialcircumstances, please contact the Technical Advisory Service for further information.
† Modern should be laid broken-bond. The required broken-bond pattern is created by the introduction of half slates, to form verges in alternate courses.
‡ Duo Modern should be laid a quarter broken-bond. The required broken-bond pattern is created by the introduction of three quarter width slates, cut from standard slates on site to form verge slates in alternate courses.
Enhanced with a broken-bond, provides a slate-like appearance, offering a very practical and affordable slate-like roof with excellent performance properties.
Minimum pitch tolerances can be reduced using
Permo Extreme
membrane
* Modern
Includes VAT Plus Scaffolding
FROM ONLY
2
PER m