Page 184 - The Complete Rigger’s Apprentice
P. 184

First let’s look at the traditional design (Figure  because the sail has the same shape whether it’s
             5-36). A block-and-tackle sheet slides on a traveler,  sheeted in hard or eased when off the wind.
             for trim and some vanging action. The fall of the   For more efficiency, try the second arrangement
             sheet runs forward under the boom to a turning  shown, in which the forward end of the boom swiv-
             block, then aft, for a fair sheet lead at any boom  els on a pedestal mounted on deck, aft of the base
             angle. You’ll frequently see the forward end of the  of the stay. When the sail is sheeted in, the boom
             boom attached to the stay the sail is hanked to  stretches the foot of the sail out for a flatter shape.
             (Figure 5-36A). This greatly lowers sail efficiency,  Off the wind, the difference between boom length
                                                         and sail foot length causes the sail to become fuller
                                                         for more efficient reaching and running.
             Figure 5-36. Self-tending staysail configurations. A
             curved traveler provides more vanging action, espe-
             cially if used in conjunction with adjustable cars on   Variations   Mr. Angleman of Angleman Ketch
             the traveler to control position of traveler sheet lead.   fame came up with a nifty elaboration on the
             Putting a turning block at the forward end of the   length-differential theme: attaching the forward end
             boom reduces load on the deck block.        of the boom to a heavy-duty track (Figure 5-37).
                                                         The turning block at the forward end is so mounted
                                                         that it pulls the track car aft when the sail is sheeted

                               A                                       Staysail Tackle
                                                           A sheet configuration with a 2:1 advantage. A
                                                           short pendant, or “lizard,” ends in a block. The
                                                           line rove through it is dead-ended to an eyebolt on
                                                           the rail and passes aft through a fairlead, also on
                                                           the rail.
                                                              This is the traditional arrangement for gaffers
                      Not so good: forward end of boom     and square-riggers with relatively small staysails
                      attached to stay                     and large crews. On shorthanded boats, a small
                                                           winch back by the belay can be used to set up the
                                                           sheet when going to weather.
                                B









                     Better: forward end of boom
                     attached to deck-mounted pedestal

                                          curved traveler











                                                                                                      163
   179   180   181   182   183   184   185   186   187   188   189