Page 38 - Arvill 2019 Catalogue
P. 38

  • Drilling in steel and
sheet metal
• Drilling in wood with
auger bits, paddle bits and forstner bits
• Various screwdriving jobs
• Use of hole saws (up to 68 mm diameter)
Hilti TE2
• Occasional drilling in steel, wood and plastics using the optional chuck adaptor
• Drilling in the 3-13 mm diameter range in solid metal / up to 20 mm in sheet metal
• Driving screws using the special bit holder
• Can be used to drill into concrete, steel & wood.
• 0 - 44,800 blows per minute
Hilti UD30
Makita HP1621
  Hilti TE7
Hilti TE7-C
Hilti TE16/30
•
• Occasional drilling in wood and steel with optional quick-release chuck
• Drilling in concrete in clean areas using the ntegrated dust removal system (DRS-M)
Cutting socket recesses in masonry
•
• Chiseling in brick and block, corrective chiseling and surface finishing on concrete
• Drilling in wood and metal, Driving anchor screws and concrete screw anchors
Drilling and hammer drilling in concrete and masonry
Drilling anchor, rebar and through holes in concrete and masonry
•
• Occasional drilling in wood and steel with optional quick-release chuck
• Cutting socket recesses in masonry
Drilling and hammer drilling in concrete and masonry
                              38
  Drilling
   


































































   36   37   38   39   40