Page 112 - Honda Civic

̌̑ʗ̌̑ʗ̎̒ɹ̍̓ɿ̎̎ɿ̎̑ɹ̨̣̖̏̍̒̌̌ɹ̌̍̍̎ɹ

Main
Main Menu
Main Menu Table of Contents
Menu
Playing the Radio

To Play the Radio TUNE ʵ Use the TUNE knob to If you do nothing, the system will
The ignition switch must be in the tune the radio to a desired frequency. then scan for the next strong station
ACCESSORY (I) or ON (II) position. Turn the knob right to tune to a and play it for 10 seconds. When it
Turn the system on by pushing the higher frequency, or left to tune to a plays a station you want to listen to,
PWR/VOL knob. Adjust the volume lower frequency. press the SCAN button again.
by turning the same knob.
SEEK ʵ The SEEK function PRESET ʵ Each side of the bars
The band and frequency that the searches up and down from the (1 ʵ6) can store one station on AM,
radio was last tuned to is displayed. current frequency to find a station and two stations on FM.
To change bands, press the AM/FM with a strong signal. To activate it, Features
button (AM or FM button). On the press the or side of the 1. Select the desired band, AM or
FM band, ST will be displayed if the SEEK bar, then release it. FM. FM1 and FM2 let you store
stationisbroadcastinginstereo. 12 stations.
Stereo reproduction in AM is not SCAN ʵ The SCAN function
available. samples all stations with strong 2. Usethe TUNE,SEEK,or SCAN
signals on the selected band. To function to tune the radio to a
To Select a Station activate it, press the SCAN button, desired station.
You can use any of five methods to then release it. You will see SCAN in
find radio stations on the selected the display. The system will scan for 3. Pick a preset number (1 ʵ6), and
band: TUNE, SEEK, SCAN, the a station with a strong signal. When hold it until you hear a beep.
preset bars, and AUTO SELECT. it finds one, it will stop and play that
station for about 10 seconds. 4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.

CONTINUED

109