Page 204 - Honda Civic

̌̑ʗ̌̑ʗ̎̒ɹ̍̓ɿ̏̏ɿ̑̓ɹ̨̣̖̏̍̒̌̌ɹ̌̎̌̐ɹ

Main Menu Table of Contents
Lights

4. Push the electrical connector back Low Beam Headlight
onto thenew socket.Makesureit
is on all the way. HOLDING CLIP

5. Insert the socket into the hole, and
turn it one-quarter turn clockwise
to lock it in place.
6. Turn on the headlights to test the
new socket.

7. If youreplaceda headlight bulbon
SOCKET TAB the driver’s side, reinstall the
engine coolant reserve tank. 1. To change the bulb on the driver’s
2. Remove the socket from the side, start the engine, turn the
headlight assembly by turning it steering wheel all the way to the Maintenance
one-quarter turn counterclockwise. right, and turn off the engine. To
change the bulb on the passenger’s
3. Remove the electrical connector side, turn the steering wheel to the
from the socket by pushing on the left.
tab and pulling the connector
down. 2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender, and pull the inner
fender cover back.
CONTINUED

201