Page 50 - Honda Civic

̌̑ʗ̌̑ʗ̎̒ɹ̍̓ɿ̍̏ɿ̏̑ɹ̨̣̖̏̍̒̌̌ɹ̌̌̑̌ɹ

Main Menu Table of Contents
Installing a Child Seat

Installing a Child Seat with a
Tether
ANCHORAGE POINTS Driver

COVER and Passenger

4. After confirming that the belt is 5. Push and pull the child seat ANCHOR Safety
locked, grab the shoulder part of forward and from side-to-side to
the belt near the buckle, and pull verify that it is secure enough to A child seat with a tether can be
up to remove any slack from the stay upright during normal driving installed in any seating position in
lap part of the belt. Remember, if maneuvers. If the child seat is not the back seat, using one of the
the lap part of the belt is not tight, secure, unlatch the belt, allow it to anchorage points shown above.
the child seat will not be secure. retract fully, then repeat these
steps. Since a tether can provide additional
To remove slack, it may help to security to the lap/shoulder belt
putweighton the child seat, or To deactivate the locking installation, we recommend using a
push on the back of the seat while mechanism and remove a child seat, tether whenever one is required or
pulling up on the belt. unlatch the buckle, unroute the seat available.
belt, and let the belt fully retract. CONTINUED

47