Page 70 - Honda Civic

̌̑ʗ̌̑ʗ̎̒ɹ̍̓ɿ̍̒ɿ̎̔ɹ̨̣̖̏̍̒̌̌ɹ̌̌̓̌ɹ

Main Menu Table of Contents
Gauges

Outside Temperature Indicator If the outside temperature is Check Fuel Cap Indicator
If equipped incorrectly displayed, you can adjust If your fuel cap is loose or missing, a
This indicator displays the outside ʶ it up to ʶ5°F ( 3°C) warmer or ‘‘CHECK FUEL CAP’’ message
temperature in Fahrenheit (U.S. cooler. appears in the information display
models) or Centigrade (Canadian after you start the engine. Turn the
models). To see the outside NOTE: The temperature must be engine off and confirm the fuel cap is
temperature, press and release the stabilized before doing this installed. If it is, loosen the cap, then
SEL/RESET button until the procedure. retighten it until it clicks at least
temperature is shown in the once. When you restart the engine,
information display. Select the outside temperature the message appears again. To clear
display, then press the SEL/RESET the message,press andholdthe Instruments and Controls
The temperature sensor is in the button for 10 seconds. The following SEL/RESET button until it goes
front bumper. Therefore, the sequence will appear for 1 second away.
4,
5,
temperature reading can be affected each:0,1,2,3,4,5, ʵʵʵʵ2,
3,
by heat reflection from the road ʵ1, 0, 1 (0, 1, 2, 3, ʵʵʵ1, 0, 1).
3,
2,
surface, engine heat, and the
exhaust from surrounding traffic. When it reaches the desired value,
This can cause an incorrect release the SEL/RESET button. You
temperature reading when your should see the new outside
speed is under 19 mph (30 km/h). temperature displayed.
The sensor delays the display update In certain weather conditions,
until it reaches the correct outside temperature readings near freezing
temperature. This may take several (32°F, 0°C) could mean that ice is
minutes. forming on the road surface.
CONTINUED
67