Page 6 - Cowdray Gold Cup 2021

Risk Assessment – Coronavirus COVID-19
Hazards identified and level of risk related to the operation
Before controls applied
After controls applied
Accidental exposure to COVID-19 from others due to sharing:
Plant
Machinery
Equipment
4
4
16
1
4
4
Exposed persons
Employees, other contractors, members of the public
Nature of harm that could be caused
Covid-19
Frequency of exposure
Varies
Duration of exposure
Continuous if hazard present
Control measures required, PPE, instruction, information, training etc.
• Where practical it should be one person one plant/machine.
• If someone has concerns, they or a member of their family have symptoms and they have self-isolated - the
plant/machine/equipment is to be thoroughly cleaned using disinfectant/anti-bacterial wipes. Latex gloves are to
be worn during this operation and all items placed into a bag and tied off.
• Only use your own designated fall protection equipment to reduce transmission of COVID-19
• Hands are to be thoroughly cleaned using antibacterial hand wash and warm water.
• All plant controls, handles, hand rails etc are to be cleaned on a daily basis.
• All site cabins are to have the door handles and work surfaces cleaned on a daily basis using
disinfectant/antibacterial wipes.
• A clean desk policy is to be adopted to aid in the full cleaning of the desk at the start of the day and throughout
as required.
• Groups of persons to be avoided where practical.
Hazards identified and level of risk related to the operation
Before controls applied
After controls applied
Travelling to and from work.
4
4
16
1
4
4
Car parking and persons on site
3
4
12
1
5
5
Access to site
3
4
12
1
4
4
Inductions
4
5
20
1
5
5
Exposed persons
Employees, other contractors, members of the public
Nature of harm that could be caused
Covid-19
Frequency of exposure
Varies
Duration of exposure
Continuous if hazard present
• Travel in own vehicles unless staff are from the same household
• Car park with vehicles to be parked in alternate parking bays giving adequate spacing to access and egress
the vehicles.
• Ensure vehicles are wiped down, gear stick, steering wheel, door handles, indicators are all disinfected at the
end of the working day.
• NO access for non- essential visitors. Deliveries will be pre-planned and work to the traffic management plan.
• NO finger print scanners to be used the security gate person will write down entries for fire call.
• When attending Inductions or any meetings ensure you maintain adequate space from the person next to
you, following 2-meter distancing if possible. Numbers in inductions/ briefings should be reduced to allow for
this.
• Request to be the sole contractor working in a particular area to reduce possible contact with others in the
3|Page