Page 36 - The Inside Scoop Archive
P. 36

Page 2 of 2



            Let's check out a label that says 80 gauge 20" x 6,000'.  Using the formula 20 x 6000 x .8 x .0004 = 38.4.
            Your roll should have 38.4 pounds of stretch film on it.  This weight does not include the core.  Now to
            double check.  Weigh a full roll of your film with the core included.  Let's say you come up with a weight of
            40.6 pounds.  Now find an empty core after the film has been used and weigh the core.  If everything is to
            the letter, your core should weigh 2.2 pounds.

            Let's be fair and recognize that there can be some variation in the weight of a roll of film due to the gauge
            having some fluctuation during the manufacturing process, or small variances due to a different film
            density.  But if you weigh your roll of film and it weighs 37.5 pounds with the core in it, and the formula
            shows it should weigh 38.4 pounds without the core, then you either have a short footage roll, or a thinner
            gauge than the label is showing.  You might have your supplier double check a roll for you to see if it is
            labeled correctly as I have seen a few cases were the wrong label was put on film at the plant by accident.

            Should you have any questions about stretch film labels, please feel free to email me about them; or just hit
            the red button below and ask.  Labels provide the information about the stretch film that you should know
            and you should know how to read them.















                                    Coming Next... What Color Is Your Stretch Film?


             Footnote: Next week we are going to take a look at the color of your stretch film, and it is not
            clear.  Stay tuned.

































            file://C:\Documents and Settings\William Jackson\My Documents\Northwoods Software\...      6/11/2007
   31   32   33   34   35   36   37   38   39   40   41