Page 32 - POND%20CAT%202020LR-GB_Neat

Pond Materials
32 |

Submerged filter and water features

BioPure® is a biomechanical submerged filter designed for a volume of pond water up to
2,000 l ensuring optimal filtering.
BioPure® is equipped with a pump that draws water through the perforated surface of
the filter cover where it travels through the filtering material and is then pumped back
into the pond either by the water jet of the pump or by a simple pipe connected to the BioPure ®
pump pouring the water into the pond.

BioPure® 2000 Basic-Set

PU Art. No. EAN Code Composition of the kit

1355014 - Content of the filter body: 16 l
1 - approx. H22 x 38 x 28 cm
✓ Connection equipment
- Hose 3 m - Ø19 mm
- Water outlet connector Ø25-13 mm
- 2 galvanized clamps 20/23 mm
✓ Elimax® 1000 pump with volcano water jet
✓ Foam filter (blue) 20 ppi
2000 l ✓ Filter materials (mixed) approx. 1.25 kg x 2
✓ Biosurface filter material. Approx. 26 units
✓ Mesh for filtering materials x 2
BioPure® filter foam
Blue, 20 ppi, approx. H1.8 x 33 x 24 cm. The two installation options with the BioPure®
submerged filter
PU Art. No. EAN Code

1358474
1

The advantages of
the BioPure® submerged filter
Foam filter (blue) 20 ppi. Water inlet Perforated cover for the water
approx. H1.8 x 33 x 24 cm. inlet from the pond:
(Art. No. 1358474) - 49 holes
- granulometry: 7 mm.

BioPure® submerged filter connected to the pump, with water
discharge through the water jet.

Nets for filter media
2x
(Art. No. 1415129)
Filtered water
outlet

Outlet pipe Biosurface filter material. Filter materials. Approx. 2 kg
Ø25 - 19 - 13 mm. Approx. 21 units. (mixed substrate, lava rock BioPure® submerged filter connected to the pump, with water
and zeolite).
discharge through the pipe at the edge of the pond.
Pump

www.outsideliving.com
| www.outsideliving.com |