Page 175 - Pontiac Catalog

Page
Interior - Floor & Package Tray 173

Rear Seat Speaker Wire 68-72 Trunk Divider Hdt 68-72 Package Tray Jute
Pn# - INL11444 -1pc $18.00 Ea Pn# - INL11056-1pc $18.00 Ea
1965-72 GM A-body, Rear Seat Speaker Wire. Runs from the 1968-72 GM A-body Chevelle, GTO, 442, GS Hardtop Trunk Pn# - INL11053-1pc $10.00 Ea
radio to the rear speaker under the carpet. Divider. This is the trunk divider board to seal off the trunk from the 1968-72 Pontiac, GTO, LeMans Rear Package Tray Jute. This is
interior. We have seen with or with out jute padding. installed below the package tray as trunk to body insulation.

68-72 Package Tray Std
Pn# - INL11054-1pc $22.00 Ea
GTO Floor Insulation 68-72 Trunk Divider Jute Hdt 1968-72 Pontiac, GTO, LeMans Standard Rear Package Tray -
1964-72 Pontiac GTO Original Style Paper Backed Floor Pn# - INL11045-1pc $11.00 Ea Black. This has no holes for the rear speakers.
Insulation. This is the tar paper material that is between the carpet 1968-72 GM A-body Chevelle, GTO, 442, GS Hardtop Trunk
and the floor pan. The paper side faces up. DividerJute. This is glued to trunk divider board to seal off the
Pn# - INL11244 - Set $65.00 Ea trunk from the interior. We have seen the jute either front or rear of
the board.
1964-67 Pontiac GTO Paper Backed Floor Insulation.
Pn# - INL11245 - Set $65.00 Ea
1968-72 Pontiac GTO Paper Backed Floor Insulation.
Note: This material is shipped in a roll and must be unrolled at a 68-72 Package Tray Mesh
temperature of 65 degrees or higher to avoid damage. This is a
special order item and can not be returned, so follow the Pn# - INL11055-1pc $42.00 Ea
unpacking directions. 1968-72 Pontiac, GTO, LeMans Deluxe Rear Speaker Package
Tray - Black. Has open holes behind mesh for the rear speakers.
68-72 Trunk Divider Convt
Pn# - INL11057-1pc $18.00 Ea
1968-72 GM A-body Chevelle, GTO, 442, GS ConvertibleTrunk
Divider. This is the trunk divider board to seal off the trunk from the Inline Tube writes restoration articles that
interior. We have seen with or with out jute padding. are featured in all your favorite magazines.
Body Wiring Hold Down
Paperwork, Interior 1964-72 GM Interior Body Floor Pan Wiring Hold Down Clips. 68-72 Trunk Jute Convertible Quarter Seal Mounting Kit
$4.25 Ea
Pn# - INL12017 - 1pc
Used to hold the body harness to the floor pan, weld or bolt in.
$12.00 Set
Pn# - INL12018 - 3pc
1964-72 GM Interior Body Floor Pan Wiring Hold Down Clips.
Used to hold the body harness to the floor pan, weld or bolt in.
Pn# - INL11046-1pc
$11.00 Ea
1968-72 GM A-body Chevelle, GTO, 442, GS Convt. trunk divider
1968-72 GM A-body Quarter Window Seal Hardware Kit 6 pc
jute. This is glued to trunk divider board to seal off the trunk from
Used to hold the rubber seal to the inside door jamb quarter.
the interior. We have seen the jute either front or rear of the board. Pn# - INL11820 8pc $4.50 Set

If you are not sure what you need or 68-72 Rear Seat Underlay 68-72 Quarter Piller Seal
have a question on a part before Pn# - INL10156 -1pc $28.00 Ea Pn# - INL12337 - 2pc $18.00 Set
ordering give us a call our friendly staff 1968-72 GM A-body Side Quarter Window Piller Seals.Located at
will get you the answer. 1968-72 GM A-body Under Rear Seat Matt. Used for sound the door jamb and quarter window at the door panel.
deadner.
Order Line 800. 385. 9452
Tech Support 586. 532. 1338
www.Inlinetube.com