Page 68 - Longacre 2017 Catalog

Steering Wheel Accessories

All Hubs And Spuds Include A Second
Precision Fit Splined QD Hub Safety Groove For Your Protection.

For Better Steering Control
Any play in the steering – including the hub – takes away control from the driver, letting
the car 'wander around'. This Pro hub has a precision machined 4130 spud and a T6
Hard Anodized splined hub for a super tight fit, yet is easy to remove and install.
Plus, there are multiple sets of mounting holes so you can 'clock' your
wheel 3 times closer.
For safety there are 2 sets of retaining grooves. If you don't get the ring
engaged it will catch on the second safety groove rather than come off on
the track. The steel spuds can be installed on either 3/4" or 5/8" shafts.
Splined hub – pull ring release with double safety grooves on
weld-on SAE 4130 spud.
#56605 for 3/4” or 5/8” shaft (for 3 bolt 5/16" x 1 3/4" ONLY) .......$72.95
#56609 Similar to above but also SFI™ approved ....................$98.95

Sprint Car: Steering Quick
Precision Splined hub Disconnects
and tapered spud for
KSE™ steering boxes • Hex type
(same hub as above) • Weld to 3/4" or 5/8"
(karts) steering shafts
#56603....$98.95
3 hole • Aluminum hub
5/16" x 1 3/4" • Double safety grooves
#56600 Hex hub – push button release ..........................$29.95
Precision Fit Splined Hub For Better
Steering Control – SFI™ Approved
(for Sports Car & Road Race suede wheels only – different mount pattern)
Any play in the steering – including the hub – takes away control
from the driver, letting the car 'wander around'. This QD release has a Steering Wheel Spacer
precision machined 4130 spud and a T6 Hard Anodized splined hub for Billet aluminum
a super tight fit, yet is easy to remove and install. Plus, there are multiple #56703 ¾” .............................. $13.95
sets of mounting holes, so you can 'clock' your wheel three times closer. (To shorten your steering shaft so you can get out
For safety there are two sets of retaining grooves, If you don't get the of the car easier use 2 or more of these spacers.)
ring engaged, it will catch on the second safety
groove rather than come off on the track.
The steel 'spuds' can be installed on ¾", Steering Wheel
⅝", or 1.0" shafts. Alignment Indicator
Splined hub – pull ring release with double • Put your steering wheel on
safety grooves on weld-on SAE 4130 spud. exactly the same way each time
Sports Car/road race: • Bolts under steering wheel and onto
Yellow release ring per FIA™, SFI™ (for 3 hole the shaft
approved. 3 hole 5 mm x 44.0 mm. 5 mm x #56700 for ¾” shaft ....................$43.95
44.0 mm
#56610 ................................ $119.90 ONLY) #56702 for 1 ⅛” shaft .................$43.95

Steering Hi
Wheel Hook Density
• Hang your wheel out Nose
of the way Pad Steering Wheel
• Bolts on – no welding • Required Nose Pad
#22576 by most rules • Triangular shape improves safety and
1 ¾” ..$15.95 • Medium density, visibility of dash – see your gauges more easily
#22577 similar to ProTecto™ • Uses material similar to our Hi Density roll bar
1 ½” ..$15.95 roll bar padding padding for better protection
#56899 .....................$16.95 #56890 ..............................................$25.95
68