Page 466 - Republic Drill

STEPPEd anGLE PLaTE TELESCOPInG GaGE SET

Double action, self centering, for measuring
Precision Tools longer life a radius. to ½” order no. Price
inside diameters, widths of slots, etc. Contact
Product descriPtion
points are hardened and precision-ground to
• Solid one piece construction for
• Hardened to 55 to 62 HRC
Set of 6, in a plastic wallet with the
• Ground flat, square and parallel
following range:
within .0002”/.005mm
5
/16
• Made from alloy steel
½
to
¾”
1¼
1
2 /8”
to
size

order no.
Price
Thread size
3½”
1
to

2 /8
3½
3” x 3” x 3” ¼” - 20 Unc Pr2276456 149.00 ¾ to 1¼” Pr1625000 21.60
6”
to
SMaLL HOLE GaGE SETS
1-2-3, 2-4-6 and 25MM X 50MM X 75MM
bLOCK SETS suPPlied in tWo diFFerent
styles :
Used in layout and setup work.
Each set consists of 2 matched, 1. Full ball construction
hardened and precision-ground 2. Half ball - flat bottom
blocks. The squareness on all construction; for
sides is within .0001” per inch. measuring inside
The blocks are supplied with a diameters or widths
plus allowance of .0001” to .0003” of small shallow holes
to allow nominal lapping. Five or slots where regular Half Ball full Ball
3/8”-16 tapped holes are provided gages are not accessible.
for clamping. Measuring Range
size order no. Price Each set consists of the .125 - .200” 3.2 - 5.1mm
1 x 2 x 3 Pr1720123 29.50 following 4 gages in a plastic .200 - .300” 5.1 - 7.6mm
2 x 4 x 6 Pr1720246 149.00 wallet. .300 - .400” 7.6 - 10.2mm
25-50-75mm Pr1720124 27.00 .400 - .500” 10.2 - 12.7mm
order
1-2-3 dELUXE bLOCK SET Description no. Price
Half ball construction Pr1640096 19.50
Used in layout and setup work. Full ball construction Pr1640097 19.50
Each set consists of 2 matched,
hardened and precision-ground
blocks. The squareness on all sides RadIUS GaGES
is within .0001” per inch. The blocks • Handy device for checking
are supplied with a plus allow- radii of tools and dies easier
ance of .0001” to .0003” to allow and faster.
3
nominal lapping. Five /8”-16 tapped • Gage features leaves for
holes are provided for clamping. 5 order no. Price measuring both concave and
3
stainless steel socket head /8” - 16 convex radii.
• Each leaf is clearly stamped
cap screws, one hex key in a plastic Pr1725123 36.00 with the radius size.
fitted case.
no. of
order no. range leaves Price
Pr1680030 1 /32” to¼” by /64” 30 15.00
1
Pr1680032 11 /64” to ½” by /64” 32 16.00
1
PROTRaCTORS
RadIUS GaGE SETS
Used to set bevels, transfer
angles etc.. Stainless steel For inspection and layout work. Each gage is marked
with permanently etched with its radius size and has five measuring surfaces for
graduations from 0-180° concave and convex radii. Satin chrome finish. Each set
in opposite directions. comes in fitted wallet.
Protractor arm of 6”. Head no. of order
size: 3½ x 2”. leaves range no. Price
17
25 1 /64 - /64 x 64ths Pr1680025 79.00
9 /32 - ½ x 32nds
order 8 9 /16 - 1 x 16ths Pr1685300 149.00
Description no. Price .010 - .030 x .005
.040 - .100 x .010
round Head Pr2280005 12.95 25 .120 - .220 x .020 Pr1683300 79.00
rectangular Head Pr2280010 12.95 .240 - .320 x .040
.350 - .500 x .050
464