Page 36 - Labels2019

ADDITIONAL INFORMATION

PROCESS COLOR ARTWORK FOIL IMPRINT LABELS
INFORMATION
• Elegant, top of the line product labels.
Preferred file formats include these programs:
• White foil has a matte finish. Use it on Clear
Adobe Acrobat ® PDF Adobe Illustrator ® Adobe InDesign ® Polypropylene (BOPP) for an opaque imprint.
Adobe Photoshop ® QuarkXPress TM
• Small type and screens are not recommended in foil
imprint. Minimum 10 point type.
• In addition to the above, we also support all PC
equivalents. Files not submitted in these formats may EMBOSSED LABELS
incur additional turnaround and artwork charges.
Please see sales associate for details.
• Choose blind embossing or embossing plus foil imprint
• Artwork needs to be at least 300 dpi, in CMYK color to give your label a new dimension.
mode and good quality free of debris. If spot colors are
required in addition to CMYK, please set art in those • Always provided on rolls. These labels cannot be finished
additional colors where needed. Please be aware there is as single labels.
an additional charge for each spot color.
• Clear Polypropylene (BOPP) cannot be embossed.
®
• All Pantone spot colors should be converted to process
colors before saving the file (unless additional spot • Give your product an upscale look with embossed labels.
colors have been purchased). Also, please provide
documentation of original Pantone spot colors used • Small type and screens are not recommended for
®
in file before converting to CMYK. For color matches, embossed labels. Minimum 10 pt. serif and 6 pt.
please provide a sample. sans-serif type.
• Convert all fonts to outlines or include necessary fonts STATIC CLING LABELS
with the art files.
• Clear or White Static Vinyl are easily applied by static
• Bleeds must have artwork extending at least 1/8" beyond electricity.
the die-line on each side that bleeds. Allow for 1/8" print
margin inside die-line. • Recommended for indoor use only.
• Registration is held to plus or minus 1/100". • White block of ink added at no charge. Ask an associate
for details.
• PDF proof provided upon request. If exact color match
is required, press proofs are available for a nominal fee • Low tack adhesive stocks are available as an alternative.
and a 72-hour turnaround. Please note that production
turnaround begins upon proof approval. Proof changes • Specify face or back static when ordering; face—inside of
and/or additional proofs will incur additional charges and window, back—outside of window.
added lead time.
GENERAL INFORMATION
• Screens are normally run at 150 lines per inch. 200 lines
per inch screens are available upon request. (Additional
turnaround time and charges may apply.) • Specify face or back adhesive when selecting Clear
Polypropylene (BOPP), Clear Polypropylene Removable,
• Please ask for a Process Color Requirements sheet White Static Vinyl or Clear Static Vinyl.
for a full list of specifications and Adobe Photoshop
®
information. • Additional ink color charge will apply if you are using
more than one ink color on the same label.
Additional charges may apply if the above guidelines are not followed. • Paper stock, ink color and foil imprint are computer
If additional charges apply, you will be notified within 24 Hours. Please generated on PDF proofs and do not reflect exact ink
see sales associate for details about 72-hour turnaround for process colors.
®
labels. Turnaround begins upon proof approval. Pantone and other
Pantone, Inc. trademarks are the property of Pantone, Inc.
• Gloss, foil and laminated stocks are not recommended
for typewriter use or some pens and/or pencils.
• Actual samples available upon request.
• Quantities of 100 and 250 may have specific finishing
requirements. Ask an associate for details.

34