Page 11 - EATON B-Line DC Catalogue
P. 11
ndard rack system (SRS)
Cabling Rack
Closed Loop Rack
Max Rack
Switch+ Rack
Switch Rack
Active+ Rack
Active Rack
Network Rack
Basic Rack
Switch or Switch+ Rack Max Rack Cabling Rack
The “Switch Rack” and “Switch+ Rack” The “Max Rack” is a 1000mm wide rack, The “Cabling Rack” is a 800mm wide rack,
configurations are 800mm wide racks, arranged specifically designed to support high density typically configured with solid doors front and
to deal with multi directional cooling demands, switching, backbone cabling and patching rear with the facility to accommodate active
often encountered with network switches, applications in a single rack envelope. The equipment densities of up to 1.5kW*. As
where cooling equipment strategies run front “Max Rack” is configured as standard with most cabling structures are passive there is
to rear as well as left to right. “Switch Racks” double vented doors front and rear, and with little need to provide higher levels of cooling
are configured with single vented doors at internal air management baffles that can capability, afforded with vented doors, indeed
the front and double vented doors at the rear support equipment loads of up to 5kW*. The vented doors in this application could lead to
and the “Switch+ Rack” is configured with “Max Rack” configuration offers extensive poor installation efficiency. “Cabling Racks”
double vented doors front and rear. Like the cable and thermal management features are configured with overhead service entry
“Active Rack” variants, the “Switch Rack” providing the ideal specification to handle points designed to accommodate cabling
and “Switch+ Racks” incorporate internal multi directional aspiring switches as well as volumes of more than 120 cables, with optional
air management baffles designed to be able high density cabling support. accessories available to support backbone or
to cope with a mixture of styles of active patch cabling as appropriate.
equipment, whilst still supporting equipment Designed for dedicated network switch
densities of up to 5kW per rack*. Like the hosting, the “Max Rack” provides an The “Cabling Rack” configuration provides
“Active Rack” the “Switch Rack” and “Switch+ optimised environment for high density switch the ideal specification for moderate density
Rack” are configured to allow overhead data applications. cabling application, promoting optimum system
and power entries to be segregated. The efficiency.
default configuration allows the entry of
around 120 cables but higher volumes can be
accommodated if needed.
Like the “Active Rack” the “Switch Rack” and
“Switch+ Racks” are able to manage moderate
equipment densities and provide the ideal
basis for upgrade to contained aisles.
*Equipment heat load density indications assume the room environment is operating within the bounds of the recommendations as detailed by ASHRAE TC9.9 11
EATON Data Centre Solutions
Cabling Rack
Closed Loop Rack
Max Rack
Switch+ Rack
Switch Rack
Active+ Rack
Active Rack
Network Rack
Basic Rack
Switch or Switch+ Rack Max Rack Cabling Rack
The “Switch Rack” and “Switch+ Rack” The “Max Rack” is a 1000mm wide rack, The “Cabling Rack” is a 800mm wide rack,
configurations are 800mm wide racks, arranged specifically designed to support high density typically configured with solid doors front and
to deal with multi directional cooling demands, switching, backbone cabling and patching rear with the facility to accommodate active
often encountered with network switches, applications in a single rack envelope. The equipment densities of up to 1.5kW*. As
where cooling equipment strategies run front “Max Rack” is configured as standard with most cabling structures are passive there is
to rear as well as left to right. “Switch Racks” double vented doors front and rear, and with little need to provide higher levels of cooling
are configured with single vented doors at internal air management baffles that can capability, afforded with vented doors, indeed
the front and double vented doors at the rear support equipment loads of up to 5kW*. The vented doors in this application could lead to
and the “Switch+ Rack” is configured with “Max Rack” configuration offers extensive poor installation efficiency. “Cabling Racks”
double vented doors front and rear. Like the cable and thermal management features are configured with overhead service entry
“Active Rack” variants, the “Switch Rack” providing the ideal specification to handle points designed to accommodate cabling
and “Switch+ Racks” incorporate internal multi directional aspiring switches as well as volumes of more than 120 cables, with optional
air management baffles designed to be able high density cabling support. accessories available to support backbone or
to cope with a mixture of styles of active patch cabling as appropriate.
equipment, whilst still supporting equipment Designed for dedicated network switch
densities of up to 5kW per rack*. Like the hosting, the “Max Rack” provides an The “Cabling Rack” configuration provides
“Active Rack” the “Switch Rack” and “Switch+ optimised environment for high density switch the ideal specification for moderate density
Rack” are configured to allow overhead data applications. cabling application, promoting optimum system
and power entries to be segregated. The efficiency.
default configuration allows the entry of
around 120 cables but higher volumes can be
accommodated if needed.
Like the “Active Rack” the “Switch Rack” and
“Switch+ Racks” are able to manage moderate
equipment densities and provide the ideal
basis for upgrade to contained aisles.
*Equipment heat load density indications assume the room environment is operating within the bounds of the recommendations as detailed by ASHRAE TC9.9 11
EATON Data Centre Solutions
