Page 44 - Gibson W.B. "The complete guide to knots"
P. 44

36
                                       Lark's Head
             PUSH     |
                 Q                     Loop" and the "Cow Hitch," because
           BIGHT UP    '                 Also known as the "Baggage Tag

                                       of its varied uses, this is very easy to
                                       make.
                                         With a short rope, take a bight in
        p,                     5)      the center and push the doubled rope
                                       up through a ring, trunk handle or
                          r
                                       some similar object (fig. 1). Bring the
                                       ends of the rope around the attach-
                                       ment and thrust them through the
                                       bight or center loop (fig. 2). Pull the
                                       ends taut and the job is done (fig. 3).
                                         For hitching a rope to a post or a
                                       rod, you have a slight problem, which
         fig. i
                     u   u             is easily solved if one end of the post
                                       is "open" or free. Here we assume
                 BRING ENDS            that one end of the rope is already
                    THRU               attached, say to an animal that is
                                       tethered, or that the rope is a very
                                       long one and that you want to hitch it
                                       at the center. In this case, place the
                                       rope across the open hands, which are
                                       held palms upward (fig. 1). Turn the
                                       hands inward, toward each other,
                                       gripping the rope loosely, to form
                                       two loops with a bight between (fig.
                                       2). At this stage, you have what is
                                       termed a "False Lark's Head."
                                         To make it real, twist the loops just
                                       enough more to bring them side by
                                       side. Slide the loops down over a
                                       post, along a rod, or over a hook and
                                       you have the same result as with the
                                       simpler method first described (fig.
                                       3).












               BRING ENDS
               DOWN THRU
   39   40   41   42   43   44   45   46   47   48   49