Page 19 - MOND Report Binder

EMBROIDERY TEST REPORT

I have tested our Tajima machines with the customer existing embroidery machine brand
(NorthPhenix) from china as per the customer`s request to in order to compare the differences.

The customer requested that I test a design on their existing china embroidery machine, brand
(Northphenix) and to test same design on Tajima machine to compare the difference.

· The first test done on Tajima Embroidery Machine, after doing some editing on the

customer`s design and tested using our Thread (Brand Isalon) and applying my new
method.

· The Second Test was carried out on the customer`s existing machine brand namely

(Northphenix) and using their poor quality embroidery thread and applying their
Embroidery Method.

Please see the following documents attached with this report:-

1. Embroidery Machines Test Report.

GENERAL REMARKS

· As from the first week, I encountered few problems regarding the unpacking of both

machines, as the customer did not arrange for a crane lorry, thus resulting a delay of the
installation. Eventually on the second week, the TFMX II C908 machine was remove and

unpacked from its metal casing using man power as requested by the customer. On the

Third the setup of the TFSN 920 was done as a lorry crane was available. This event cause a
delay in my Machine and Software Training which I had to modify and adjust my schedule

several times.

Page 16 of 17