Page 270 - ASME IMECE 2018 Program

TRACK MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS – TUESDAY, NOVEMBER

12-13 RECENT ADVANCES AND 12-17 CONGRESS-WIDE SYMPOSIUM ON
APPLICATIONS IN MESHFREE AND ADDITIVE MANUFACTURING: FAILURE OF
PARTICLE METHODS ADDITIVELY MANUFACTURED
MATERIALS
12-13-2 Recent Advances and Applications in
Meshfree and Particle Method 12-17-2 Failure and Fracture of Additively
Third Floor, David L. Lawrence Convention Center, Room 338 Manufactured Materials and Structures – 2
Third Floor, David L. Lawrence Convention Center, Room 335
3:45pm–5:30pm
3:45pm–5:30pm
session Chair: C.T. Wu, Livermore Software Technology
Corporation, Livermore, CA, United States session Chair: Ashfaq Adnan, University of Texas Arlington,
Arlington, TX, United States
session Co-Chair: Michael Hillman, Pennsylvania State
University, University Park, PA, United States session Co-Chair: H. Eliot Fang, Sandia National
Laboratories, Albuquerque, NM, United States
3:45pm – Gradient Reproducing Kernel Collocation Method
for high order PdEs 3:45pm – Role of build Architecture and Loading Rate on
Technical Presentation. iMECE2018-88725 Quasi-static and dynamic Fracture behaviors of Additively
sheng-Wei Chi, Ashkan Mahdavi, University of Illinois at Printed Abs studied using diC
Chicago, Chicago, IL, United States Technical Presentation. iMECE2018-87028
John P. isaac, hareesh Tippur, Auburn University, Auburn,
4:00pm – A Coupled immersed iGA-RKPM Formulation for AL, United States
Air-blast-structure interaction
Technical Presentation. iMECE2018-89855 4:06pm – Characterizing the increase in inter-bead bond
Georgios Moutsanidis, University of California, San Diego, strength of FdM Parts due to Thermal Annealing
San Diego, CA, United States, Yuri bazilevs, Brown University, Technical Presentation. iMECE2018-89193
Providence, RI, United States Rhugdhrivya Rane, Robert M. Taylor, University of Texas at
Arlington, Arlington, TX, United States
4:15pm – The Conforming Reproducing Kernel Method for
an Agile design-to-simulation Workflow 4:27pm – AFM Analysis of Polybutadiene distribution in the
Technical Presentation. iMECE2018-90041 Weld Zones of FdM-Printed Abs dogbones
Jacob Koester, Sandia National Laboratories, Albuquerque, Technical Presentation. iMECE2018-89732
NM, United States, Jiun-shyan Chen, University of California, david Collinson, Northwestern University, Evanston, IL, United
San Diego, La Jolla, CA, United States, Michael Tupek, scott States
Mitchell, Joseph bishop, Sandia National Laboratories,
Albuquerque, NM, United States 4:48pm – Additive Manufacturing and Mechanical
Properties of bonelike ultra-Light nanocomposite
4:30pm – A Conforming Reproducing Kernel Finite Volume structures
Method Technical Presentation. iMECE2018-89773
Technical Presentation. iMECE2018-89884 sheikh Ferdous, University of Massachusetts Dartmouth,
Michael hillman, Pennsylvania State University, University Dartmouth, MA, United States, Ashfaq Adnan, sushma
Park, PA, United States, saili Yang, Pennsylvania State Pothana, University of Texas at Arlington, Arlington, TX, United
University, State College, PA, United States States

4:45pm – Advances in RVE Large deformation Analysis of 5:09pm – Thermal Modeling and Meltpool Monitoring of
heterogeneous structures using an immersed Particle Laser Melting of ss 17-4 Ph
Modeling Method and Mechanistic Machine Learning Technical Presentation. iMECE2018-89960
Technology Adrian Lew, Stanford University, Stanford, CA, United States
Technical Presentation. iMECE2018-88773
Zeliang Liu, C.T. Wu, Livermore Software Technology
Corporation, Livermore, CA, United States

5:00pm – A Comparison between AnCF and sPh Methods
for Liquid sloshing Problems
Technical Presentation. iMECE2018-89660
Mohammed Mujtaba Atif, Emanuele Grossi, University of
Illinois at Chicago, Chicago, IL, United States

190