Page 191 - BPT Hardware & Fixing Technology Catalog

Fixing technology

Toggle Fixing with Disk

• Appropriate for: plasterboards, gypsum fibreboards, chipboards, ce-
ment fibreboards, wood wool slabs, hardboards, hollow tile ceilings,
reinforced block floor, hollow brick ceilings, trapezoidal sheet metal,
etc.
• To fix: lamps, racks, switches, wall units, curtain rails, rack rails, cable
ducts, boilers, wardrobes, etc.

Technical Data *Recommended loads in kN
Drilling Ø Thread Plaster- WoodenCement Breaking
mm M x length board* board* fiber forces*
Article No. Article Description QTY mm plate*
8065 5 100 TOGG.FIX. W.NUT A.WASH. M5X100 25 14 5 x 100 0.23* 0.40* 0.65* 3.00

Toggle Fixing with Hook

• Appropriate for: plasterboards, gypsum fibreboards, chipboards, ce-
ment fibreboards, wood wool slabs, hardboards, hollow tile ceilings,
reinforced block floor, hollow brick ceilings, trapezoidal sheet metal,
etc.
• To fix: lamps, hanging baskets, etc.

Technical Data *Recommended loads in kN
Drilling Ø Thread Plaster- WoodenCement Breaking
mm M x length board* board* fiber forces*
Article No. Article Description QTY mm plate*
8066 5 100 TOGGLE FIXING W.HOOK M5X100 25 14 5 x 100 0.23* 0.40* 0.65* 0.60**

Toggle Bolt for Trapezoidal Steel Sheets

• Pre-mounted including turnout-protected threaded rod, Hypalen sea-
ling disk, U-washer and hexagon nut – rapidly and econimic
• FM-tested and approved by the VdS No G 4890027 – approved for
tube fixture up to Ø 50 according to VdS provisions as well as of air
conditioning channels, illumination rails, mounting rails, holding traver-
ses, etc. – tested and guaranteed safety
• Turnable threaded rod – each fixing point can be leveled individually; it
is possible to create any incline
• Galvanized – corrosion-protected
Load value:
• Max. point load on trapezoidal sheet metals / tubes and other fixtures:
800 N / 1000 N
• Breaking load value plug: 20 kN
• It is recommended to apply each 4th or 5th fixture at a statically highly
loadable position

Technical Data
Article No. Article Description QTY Drilling Ø Thread M x length mm
8067 8 100 TOGG.FIX. F.TRAP. SH. M. 8X100 50 22 mm 8 x 100
8067 8 200 TOGG.FIX. F.TRAP. SH. M. 8X200 25 22 mm 8 x 200
8067 8 300 TOGG. FIX. F.TRAP. SH. M.8X300 25 22 mm 8 x 300
8067 10 100 TOGG. FIX. F.TRAP. SH.M.10X100 25 25 mm 10 x 100
* Indicated values depending on the building material
** Hooks are bending up
Breaking forces:Threaded rod breaking or failure of the tipping element (the
load-bearing capacity of the ceiling or of the wall is not considered)

Availability subject to country specific rules and regulations www.buypremiumtools.com 191